HP PageWide MFP P77740-60 series - User Guide

To re-enable AirPrint
AirPrint is enabled, by default. If it becomes disabled, you can use the following instructions to enable it
again.
1. Open the EWS. For more information, see Open the EWS.
2. On the Network tab, click AirPrint and then click Status.
3. In the AirPrint Status row, click Turn On AirPrint.
Tips for print success
Software settings selected in the print driver apply only to printing. They do not apply to copying or scanning.
●
Cartridge tips
●
Paper loading tips
●
Printer settings tips (Windows)
●
Printer settings tips (OS X)
Cartridge tips
See Tips for working with cartridges.
Paper loading tips
See Tips for selecting and using paper.
Printer settings tips (Windows)
●
To change default print settings, do one of the following:
—
In the HP Printer Assistant, click Print, Scan & Fax , and then click Set Preferences.
—
On the File menu in the software program, click Print. Open the Printer Properties dialog box.
●
On the Color or Finishing tab of the printer driver, set the following options as needed:
—
Print in Grayscale: Allows you to print a black-and-white document using only the black cartridge.
It also allows you to print documents in high-quality grayscale, which uses color cartridges. Click
Black Only or High Quality CMYK Grayscale, and then click OK .
—
Pages per sheet: Helps you specify the order of the pages if you print document in more than two
pages per sheet.
—
Flip pages up: Depending on paper orientation, you can ip pages up for short-edge binding
(calendars, for example) or long-edge binding (books, for example).
—
Booklet Layout: Allows you to print a multiple-page document as a booklet. It places two pages on
each side of a sheet that can then be folded into a booklet in half size of the paper. Select a binding
method from the drop-down list, and then click OK :
72 Chapter 6 Print ENWW