HP PageWide MFP P77740-60 series - User Guide
5. Touch Tray Selection.
6. Select the tray into which you loaded the paper in step 1.
NOTE: If you select Tray 1 and it is set to Any Size and Any Type, be sure to select the correct media size for
that tray.
Reduce or enlarge a copy
1. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the document feeder.
2. On the control panel, touch the Copy icon.
3. In the display, touch the Document icon.
4. Touch Settings to view the Copy Settings menu.
5. Touch Resize, and select one of the resize menu options.
Load and copy identication cards
Use this feature to copy both sides of identication cards, or other small-sized documents, onto the same
side of one sheet of paper. The product prompts you to copy the rst side, and then to rotate the second side
on the scanner glass and copy again. The product prints both images on a single page.
1. Load the ID card onto the scanner glass. Orient the card using the media mark at the back-left of the
scanner glass.
For more information, see Load the scanner.
2. Close the scanner lid.
3. On the control panel, touch the Copy icon.
4. In the display, touch the ID Card icon.
5. Touch Settings to view the Copy Settings menu.
6. Select the tray, copy quality, and lightness/darkness settings.
ENWW Copy 75