HP PageWide MFP P77740-60 series - User Guide

7. Follow the prompts on the control panel to copy the rst side of the ID card, rotate and orient the card
on the scanner glass, and then complete copying and printing the ID card.
Copy photos
NOTE: Copy photos from the scanner glass, not from the document feeder.
1. Place the photo on the scanner glass, picture-side down at the upper-left corner of the glass, and close
the scanner lid.
For more information, see Load the scanner.
2. On the control panel, touch the Copy icon, and then touch the Document icon.
3. Touch Settings, make sure that Enhancement is set to Mixed (which is the default), and set the Color/
Black as needed.
4. Depending on the product model, touch Copy, or touch (Back) and then touch Copy.
Load and copy mixed-size originals
Use the scanner glass to make copies of mixed-size originals.
NOTE: You can use the document feeder to copy mixed-size originals only if the pages share a common
dimension. For example, you can combine Letter and Legal size pages because they have the same width.
Stack the pages so the top edges are even with each other, and so that the pages have the same width but
varying lengths.
The size of the copied area is based on the rst media size detected by the printer.
1. Load paper that is large enough for the largest page in the original document into a tray.
2. Place one page of the original document face down on the scanner glass. Use the media mark at the
back-left of the glass to orient the document.
For more information, see Load the scanner.
3. On the control panel, touch the Copy icon.
4. In the display, touch the Document icon.
5. Specify the number of copies, and select the tray containing the paper for this job.
6. Follow the prompts on the control panel to copy the document loaded on the glass.
76 Chapter 7 Copy and scan ENWW