HP PageWide MFP P77740-60 series - User Guide

●
Change account settings (OS X)
Change account settings in the EWS
1. Open the EWS. For more information, see Open the EWS.
2. On the Scan tab, click Scan to Email, and then click Settings.
3. In the setup page, do one of the following:
●
If your organization uses one email server for all its emails: In the Outgoing Email Settings
section, change the email addresses and the SMTP server information, as needed.
●
If your organization uses multiple email servers for its emails: In the Outgoing Email Proles
section, change the email addresses, names, and security PINs for each email prole, as needed.
4. To verify the changes to the prole, click Save and Test and follow the onscreen instructions.
5. When done, click Apply.
Change account settings (OS X)
1. Open HP Utility. For more information, see Open HP Utility.
2. Click Scan to Email.
The EWS opens. Follow the instructions in Change account settings in the EWS.
Scan to a network folder
●
To set up scan to a network folder
●
To scan to a network folder
To set up scan to a network folder
1. Open the EWS. For more information, see Open the EWS.
2. On the Settings tab, click Control Panel Customization, and then click Quick Sets.
3. Click (Add), for Type select Scan to Network Folder, and follow the onscreen instructions for adding
a Quick Set
prole for a network folder. When nished, click Next .
4. In this page, follow the onscreen instructions for setting up the network folder, authentication
requirements, and scan and le congurations. When nished, click Apply.
5. In the settings page, follow the onscreen instructions for conguring scan settings, such as paper size
and scan resolution. When nished, click Save.
To scan to a network folder
1. Load your original print-side down on the scanner glass or print-side up in the automatic document
feeder.
For more information, see Load the scanner or Load the document feeder.
2. Do one of the following:
●
On a 203-mm (8-in) control panel: Touch the Scan icon, the Network Folder icon, and then navigate
to the network folder.
●
On a 109-mm (4.3-in) control panel: Touch the Quick Sets icon, and then select the Quick Set
prole for the network folder.
80 Chapter 7 Copy and scan ENWW