HP PageWide MFP P77740-60 series - User Guide

▲
Start the scan from within the TWAIN-compliant program. See the software program help or
documentation for information about the commands and steps to use.
NOTE: When scanning from a TWAIN-compliant program, the HP Scan software program might start
automatically. If the HP Scan program starts, you can make changes while previewing the image. If the
program does not start automatically, the image goes to the TWAIN-compliant program immediately.
To scan from a WIA-compliant program
WIA is another way to scan an image directly into a software program. WIA uses Microsoft software to scan,
instead of the HP Scan software.
Generally, a software program is WIA-compliant if it has a command such as Picture/From Scanner or
Camera in the Insert or File menu. If you are unsure whether the program is WIA-compliant, see the software
program help or documentation.
▲
To scan, do one of the following:
●
Start the scan from within the WIA-compliant program. See the software program help or
documentation for information about the commands and steps to use.
●
Windows Vista or XP: In the control panel, open the Hardware and Sound folder, open the
Cameras and Scanner folder, and double-click the product icon. This opens the standard Microsoft
WIA Wizard, which enables you to scan to a le.
●
Windows 7, 8, 8.1, or 10: In the control panel, open the Devices and Printers folder, and double-
click the product icon. This opens the standard Microsoft WIA Wizard, which enables you to scan to
a le.
Scan using Webscan
Webscan is a feature of the HP Embedded Web Server (EWS) that lets you scan photos and documents from
your printer to your computer using a web browser.
This feature is available even if you did not install the printer software on your computer.
NOTE:
●
By default, Webscan is o. You can enable this feature from the EWS.
●
If you are unable to open Webscan in the EWS, your network administrator might have turned it o. For
more information, contact your network administrator or the person who set up your network.
To enable Webscan
1. Open the EWS. For more information, see Open the EWS.
2. Click the Settings tab.
3. In the Security section, click Administrator Settings.
4. Select Webscan from EWS, and click Apply.
ENWW Scan 83