HP PageWide MFP P77740-60 series - User's Guide

Pastaba Meksikos vartotojams
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada.
Para saber el modelo de la tarjeta inalámbrica utilizada, revise la etiqueta regulatoria de la impresora.
Pastaba Japonijos vartotojams
この機器は技術基準適合証明又は工事設計認証を受けた無線設備を搭載しています。
Pranešimas vartotojams Korėjoje
해당 무선설비는 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없음
(무선 모듈이 탑재된 제품인 경우)
Papildomi pareiškimai telekomunikacijų (faksų) produktams
●
Papildomas FCC pareiškimas apie telekomunikacijų gaminius (JAV)
●
„Industry Canada“ CS-03 reikalavimai
●
Pranešimas Kanados telefonų tinklo vartotojams
●
Pranešimas Vokietijos telefonų tinklo vartotojams
●
Pastaba Japonijos vartotojams
●
Pareiškimas Australijos rinkai dėl laidinių fakso aparatų
●
Naujosios Zelandijos telekomo pareiškimai
Papildomas FCC pareiškimas apie telekomunikacijų gaminius (JAV)
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear
(or bottom) of this equipment is a label that contains, among other information, a product identier in the
format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone company.
Applicable connector jack Universal Service Order Codes (“USOC”) for the Equipment is: RJ-11C.
A plug and jack used to connect this equipment to the premises wiring and telephone network must comply
with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and
modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is
also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line. Excessive
RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not
all areas, the sum of RENs should not exceed ve (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local telephone company. For products
approved after July 23, 2001, the REN for this product is part of the product identier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 00 is a REN of
0.0).
If this equipment causes harm to the telephone network, the telephone company will notify you in advance
that temporary discontinuance of service may be required. But if advance notice isn't practical, the telephone
company will notify the customer as soon as possible. Also, you will be advised of your right to le a
complaint with the FCC if you believe it is necessary.
208 Priedas A Techninė informacija LTWW