HP LaserJet Pro MFP M28-M31 - User Guide

NOTE: For Android devices that support Wi-Fi Direct, if the connection method is set to Automatic, the
connection will occur automatically, without a password prompt. If the connection method is set to Manual,
you will need to either press the Wireless button on the printer to connect to an Android device, or provide a
personal identication number (PIN) — displayed on the printed report — as a password to connect to a
Windows (8.1 or later) device.
NOTE: To access the Wi-Fi Direct password, from the EWS open the Networking tab, and then click Wi-Fi
Direct Setup.
8. Open the document, and then select the Print option.
9. Select the printer from the list of available printers, and then select Print.
10. After the print job is complete, some mobile devices need to be reconnected to the local network.
The following devices and computer operating systems support Wi-Fi Direct:
● Android 4.0 and later tablets and phones with the HP Print Service or Mopria mobile printing plugin installed
● Most Windows 8.1 computers, tablets, and laptops that have the HP print driver installed
The following devices and computer operating systems do not support Wi-Fi Direct, but can print to a printer that
does:
● Apple iPhone and iPad
● Mac computers running OS X
For more information on Wi-Fi Direct printing, go to www.hp.com/go/wirelessprinting.
Wi-Fi Direct capabilities can be enabled or disabled from the HP Embedded Web Server (EWS).
Enable or disable Wi-Fi Direct
Wi-Fi Direct capabilities must be enabled rst from the printer EWS.
Step one: Open the HP Embedded Web Server
1. Print a conguration page to determine the IP address or host name.
a. Press and hold the Start Copy button until the Ready light begins blinking.
b. Release the Start Copy button.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the
printer conguration page. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be safe,
select the option to continue to the website. Accessing this website will not harm the computer.
Step two: Enable or disable Wi-Fi Direct
1. On the Networking tab, click the Wi-Fi Direct Setup link in the left navigation pane.
2. Select the On option, and then click Apply. Selecting the O option disables Wi-Fi Direct printing.
28 Chapter 4 Print ENWW