HP LaserJet Pro MFP M28-M31 - User Guide
Congure IP network settings
●
Introduction
●
Printer sharing disclaimer
●
View or change network settings
●
Manually congure IPv4 TCP/IP parameters
Introduction
Use the following sections to congure the printer network settings.
Printer sharing disclaimer
HP does not support peer-to-peer networking, as the feature is a function of Microsoft operating systems and
not of the HP printer drivers. Go to Microsoft at www.microsoft.com.
View or change network settings
Use the HP Embedded Web Server to view or change IP conguration settings.
1. Open the HP Embedded Web Server (EWS):
a. Print a conguration page to determine the IP address or host name.
i. Press and hold the Start Copy button until the Ready light begins blinking.
ii. Release the Start Copy button.
b. Open a web browser, and in the address line, type the IP address or host name exactly as it displays
on the printer conguration page. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be
safe, select the option to continue to the website. Accessing this website will not harm the computer.
2. Click the Networking tab to obtain network information. Change settings as needed.
Manually congure IPv4 TCP/IP parameters
Use the EWS to manually set an IPv4 address, subnet mask, and default gateway.
1. Open the HP Embedded Web Server (EWS):
a. Print a conguration page to determine the IP address or host name.
i. Press and hold the Start Copy button until the Ready light begins blinking.
ii. Release the Start Copy button.
ENWW Congure IP network settings 45