Instructions for replacing a memory module

852270-121 3
8. Spread the two retention clips outward (1) until
the memory module tilts up at a 45-degree angle.
Remove the module (2). Use the same procedure to
remove both memory modules.
9. Touch the replacement memory module bag to
the metal of the computer, and then remove the
replacement memory module from the bag.
Replacing the memory module
1.
A
li
g
n the notched ed
g
e of the module (1) with the tab
in the slot, and then press the module into the slot at
an angle until it is seated (2). Press down on the module
until the side retention clips snap into place (3).
2. Grasp the bottom ed
g
e of the cover and carefully
rotate the cover toward the display assembly.
3. Align the cover with the computer and press it down
until it snaps into place.
4. Replace the Phillips screw.