User Manual

Re-attaching the monitor stand
CAUTION: The screen is fragile. Avoid touching or applying pressure to the screen; doing so can cause
damage.
TIP: Consider the placement of the monitor, because the bezel might cause interfering reections from
surrounding light and bright surfaces.
1. Place the monitor head on a level surface with the bottom side up.
CAUTION: Do not lay the monitor face down when reattaching the stand. Stress on the curvature of the
display panel may damage the panel if the monitor is placed face down.
2. Position the stand above the bottom side of the monitor so that the connector tab on the stand is
aligned with the connector slot on the monitor.
3. Press the stand (1) into the connector slot until it clicks into place.
4. Using an L-shaped screwdriver, install the four screws (2) into the monitor to secure the stand in place.
5. Set the assembled monitor upright on a level surface.
12 Chapter 1 Getting Started