HP ThinPro 5.2 - Administrator Guide
Table 6-9 Citrix Connection Manager > Conguration
Option Description
Name The connection name.
Service URL The Citrix server hostname or IP address. If you are conguring a connection to a server
on an HTTPS site, enter the FQDN for the site and the local root certicate in the Citrix
certicate store.
Connection Mode Sets the connection mode to one of the following:
●
PNAgent
●
StoreFront
●
StoreFront-SmartCard
●
Direct
If set to PNAgent, StoreFront, or Direct, you can set the username, password, and
domain.
If set to StoreFront-SmartCard, you can set the security module type and the action to
perform if the smart card is unplugged.
Auto Start Resource Species the name of a resource to start automatically upon connection.
Auto Start Desktop With this option selected, a desktop-type resource will start automatically upon
connection, if available.
Auto Start Single Application With this option selected, and if there is a single published resource, that resource will
start automatically upon connection.
Show applications on desktop With this option selected, remote resources from the connection will be shown on the
local ThinPro desktop.
Show applications on taskbar With this option selected, remote resources from the connection will be shown on the
local ThinPro taskbar.
Auto Reconnect Applications on Login With this option selected, resources that were open when the user last logged out will be
reopened when they log in again.
TIP: If not using the Citrix SmoothRoaming feature, disable this option to increase your
connection speed.
Table 6-10 Citrix Connection Manager > Security
Ignore Certicate Check If enabled, certicates are not checked and the connection is insecure.
Force HTTPS Connection If enabled, the connection is forced to use the HTTPS protocol, helping to ensure a
secure connection.
NOTE: See Common connection settings on page 26 for information about the settings available on the nal
page of the Citrix Connection Manager.
Citrix connection-specic settings 35