HP DesignJet T1700 Z6 Z9+ Printer - Legal Information

Safety: IEC 60950-1:2005 (2nd Edition) + A1:2009 + A2:2013
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013 /+ AC:2011
CAN/CSA-C22.2 No. 60950-1-07 + A1:2011 + A2:2014 / UL 60950-1 (Second Edition) + A1:2011 + A2:2014
EN 62479:2010
RoHS: EN 50581:2012
Other: ENERGY STAR Qualied Imaging Equipment Operational Mode (OM) Test Procedure
The product herewith complies with the requirements of the Low Voltage Directive 2014/35/EU, the EMC
Directive 2014/30/EU, the RoHS Directive 2011/65/EU, and carries the marking accordingly.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Additional information
1. The product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design.
The Regulatory Model Number is the main product identier in the regulatory documentation and test
reports; this number should not be confused with the marketing name or the product numbers.
2. This product was tested in a typical HP environment.
Jordi Gorchs, Manager
Large Format Printing Division
August 10, 2017
Local contacts for regulatory topics only
EU: HP Deutschland GmbH, HP HQ-TRE, 71025 Böblingen, Germany
U.S.: HP Inc., 1501 Page Mill Road, Palo Alto 94304, USA (tel: [phone])
http://www.hp.eu/certicates
ENWW Local contacts for regulatory topics only 15