User's Manual

Table 3-1 Machine Subsystem Parameter Values

Parameter Value

arm_source

{RUN | INTermodule | MACHine {1|2}}

pod_list

{NONE | <pod_num>[, <pod_num>]...}

pod_num integer from 1 to 12

arm_level integer from 1 to 11 representing sequence level

machine_name string of up to 10 alphanumeric characters

res_id

{<state_terms>|H|J} for state analyzer

{<state_terms>|EDGE{1|2}} for timing analyzer

new_text string of up to 8 alphanumeric characters

state_terms

{A|B|C|D|E|F|G|I| RANGE{1|2}|TIMER{1|2}}

res_terms

{<res_id>[,<res_id>]...}

MACHine

Selector :MACHine<N>

The MACHine <N> selector specifies which of the two analyzers (machines)

available in the module the commands or queries following will refer to.

Because the MACHine<N> command is a root level command, it will normally

appear as the first element of a compound header.

<N> {1|2} (the machine number)

Example OUTPUT XXX; ":MACHINE1:NAME ’TIMING’"

MACHine Subsystem

MACHine

3–4