User's Manual

Query :WLISt:OTIMe?
The OTIMe query returns the O Marker position in time. If data is not valid,
the query returns 9.9E37.
Returned Format [:WLISt:OTIMe] <time_value><NL>
Example OUTPUT XXX;":WLIST:OTIME?"
OVERlay
Command :WLISt:OVERlay <module_number>,<label>
[,<label>]...
The OVERlay command overlays two or more oscilloscope waveforms and
adds the resultant waveform to the current waveform display. The first
parameter of the command syntax specifies which slot contains the
oscilloscope time base card. The next parameters are the labels of the
waveforms that are to be overlaid.
Overlay only inserts oscilloscope waveforms. It cannot be used with analyzer
waveforms.
<module_spec> {1|2|3|4|5|6|7|8|9|10}(slot where master card is located)
<waveform> string containing <acquisition_spec>{1|2}
<acquisition_
spec>
{A|B|C|D|E|F|G|H|I|J} (slot where acquisition card is located)
Example OUTPUT XXX;":WLIST:OVERLAY 3, ’C1’,’B1’"
WLISt Subsystem
OVERlay
4–10