HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 3.00.00 Installation and Reference Guide (AA-RW7SJ-TE, March 2008)

Figure 3 MPIO Properties page with DSM Install tab enabled
NOTE:
If the vendor-supplied DSM and MS DSM exist on the same system, the vendor-supplied DSM is
always gi
ven priority.
Managing multipath disk devices
Microsoft provides a generic user interface to manage the disk devices that are controlled by MPIO. This
interface, which can be accessed through the Multi-Path Disk D evice Properties page, under the MPIO
tab, enables you to perform basic disk and path management. Figure 4 shows the Multi-Path Disk
Device Properties page. HP MPIO EVA DSM supports the management infrastructure of the MPIO tab
for features that are applicable to the HP DSM.
To ma nag e the Multi-Path Disk Device through this interface, complete the following steps:
1. Go to Device Manage r and select the MPIO managed device identified by Multi-Path Disk device.
2. Right-click and select Properties. The Multi-Path Disk Device Properties page displays.
44
Managing MPIO devices using Microsoft-provided interfaces on Windows Server 2008