Installation and Reference Guide for HP MPIO Full Featured DSM for MSA1000/1500 (Active-Active) Disk Arrays 3.00.00 (AA-RW8AD-TE, March 2008)

Event ID Message
Description
Contents of t he
data dump
37
DSM_name is attempting an
operation on pseudo-LUN.
The Type is noted in the
dump data.
DSM_name has called
DSMNotification on a
pseudo-LUN.
Thetypeof
notification called
by DSM
38
A device under pseudo-LUN,
being controlled by
DSM_name was removed,
but the DSM failed the
operation.
An MPIO call to DSM’s
RemoveDevice operation failed.
DSM ID of the failed
attempt
HP MPIO MSA DS
Meventlogmessages
Table 6 lists
the HP MPIO MSA DSM event log messages and provides a description of each message.
Table 6 HP MPIO MSA DSM event log messages
Event ID Message
Description
101
Discovered a new multipath
capable disk with serial
number X; first path SCSI
address Y.
A new multipath disk has been discovered. X
represents the serial number of the new disk. Y is
the SCSI address of the first path to this disk.
102
A new path (SCSI address
Y) was added to existing
multipath capable disk X.
A new path to an existing multipath disk has been
discovered. X represents the serial number of the
disk. Y is the SCSI address of the new path that
was found.
103
The path (SCSI address Y)
to multipath capable disk
X has recovered.
A failed path to an existing multipath disk has
recovered. X represents the serial number of the
disk. Y is the SCSI address of the path that has been
recovered.
108
The DSM has completed
remove processing for
path (SCSI address Y) to
multipath capable disk X.
The DSM has completed processing the removal
notification for a path to the given multipath disk. X
r epresents the serial number of the disk. Y is the
SCSI address of the path for which the removal
notification has been processed.
109
The DSM (version X) has
been started successfully.
TheDSMhassuccessfullycompletedtheinitialization
during startup. X represents the version of the DSM.
301
The DSM failed to
initialize during startup.
The DSM did not initialize successfully during
startup.
302
An unrecoverable path
failure occurred on SCSI
address Y. Disk X failed
due to no redundant paths
available.
All p aths to an existing multipath disk have failed.
X represents the serial number of the disk. Y is the
SCSI address of the last path that failed.
303
Too many paths for disk
with serial number X.
Path (SCSI address Y) not
added.
A new path in excess of the supported number
of paths for an existing multipath disk has be en
discovered. X represents the serial number of the
dis
k. Y is the SCSI address of the newly found path.
HP MPIO Full Featured DSM for MSA1000/1500 (Active-Active) Disk Arrays 3.00.00
33