HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 4.01.00 installation and reference guide (AA-RW7SP-TE, September 2010)
Example:
hpdsm set device=1 subset=add path=all
Device Name:HP HSV210
Device Serial No.:600508B400101F6A000070001D950000
Change Subset setting (y/n)? y
Subset setting changed. Verify by using "hpdsm devices" command.
Example:
hpdsm set device=all subset=remove path=1
Successful for all the devices. Verify by using "hpdsm devices" command.
NOTE:
• device=all changes the SUBSET STATE for all the devices
• path=all enables or disables subset settings and adds or removes all the available paths to or
from the subset
• Paths in the failed state cannot be added or removed to or from the subset
• hpdsm set device=x subset=remove path=all will cleanup the failed paths and disables
the subset
hpdsm set device alb
Syntax: hpdsm set device=x alb=y/n
Syntax: hpdsm set device=all alb=y/n
The hpdsm set device alb command changes the Adaptive Load Balance setting for the device
x or for all the devices depending on the input parameter specified.
Example:
hpdsm set device=1 alb=y
Device Name:HP HSV210
Device Serial No.:600508B400101F6A000070001D950000
Change Adaptive Load Balance setting (y/n)? y
ALB settings changed. Verify by using "hpdsm devices" command.
HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 4.01.00 installation
and reference guide 27