HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 4.01.00 installation and reference guide (AA-RW7SP-TE, September 2010)

HP MPIO EVA DSM event log messages
Table 6 lists the HP MPIO EVA DSM event log messages and provides a description of each message.
Table 6 HP MPIO EVA DSM event log messages
DescriptionMessageEvent ID
A new multipath disk has been dis-
covered. X represents the serial
number of the new disk. Y is the
SCSI address of the first path to this
disk.
Discovered a new multipath
capable disk with serial
number X; first path SCSI
address Y.
101
A new path to an existing multipath
disk has been discovered. X repres-
ents the serial number of the disk.
Y is the SCSI address of the new
path that was found.
A new path (SCSI address
Y) was added to existing
multipath capable disk X.
102
A failed path to an existing mul-
tipath disk has recovered. X repres-
ents the serial number of the disk.
Y is the SCSI address of the path
that has been recovered.
The path (SCSI address Y)
to multipath capable disk
X has recovered.
103
A previously selected path has been
restored as the preferred path for
I/O operation. X represents the
serial number of the disk. Y is the
SCSI address of the preferred path
that has been restored.
The preferred path (SCSI
address Y) for multipath
capable disk X has been
restored.
107
The DSM has completed processing
the removal notification for a path
to a given multipath disk. X repres-
ents the serial number of the disk.
Y is the SCSI address of the path
for which the removal notification
has been processed.
The DSM has completed re-
move processing for path
(SCSI address Y) to mul-
tipath capable disk X.
108
The DSM has successfully com-
pleted the initialization during star-
tup. X is the version of the DSM.
The DSM (version X) has
been started successfully.
109
This message is logged when the
DSM detects that a previously failed
(inoperative) multipath capable disk
with serial number X has recovered
and become operational again.
The previously failed
multipath capable disk X
has recovered.
110
This event is logged when
generation of removal event
notifications (Event IDs 304, 302
and 108) for the multipath capable
disk with serial number X has been
disabled upon request in the DSM.
The removal event notific-
ations for multipath cap-
able disk X have been
disabled upon request.
111
Multipathing driver event log messages44