HP MPIO Full Featured DSM for EVA4x00/6x00/8x00 family of Disk Arrays 4.01.00 installation and reference guide (AA-RW7SP-TE, September 2010)

DescriptionMessageEvent ID
This event is logged when the DSM
detects an unrecoverable failure of
a multipath capable disk. Although
the disk may be visible to the
system, the data on the disk may
not be accessible. Please check the
status of the multipath capable disk
at the array end. X represents the
serial number of the disk.
An unrecoverable failure
has occurred on multipath
capable disk X. The data
on this disk may be
inaccessible.
308
The DSM cannot manage multipath
capable disk X (SCSI address Y)
due to an internal error.
The DSM cannot manage
multipath capable disk X
(SCSI address Y) due to
an internal error.
309
This event is logged when DSM
detects that the path with SCSI
address Y is inconsistent and is
moved to failed state. X represents
the serial number of the disk. A
reboot of the system is
recommended to overcome this
inconsistent state.
The DSM detected an incon-
sistency in the path (SCSI
address Y) to the mul-
tipath capable disk X.
This path has been marked
as failed.
310
Multipathing driver event log messages46