ProtectTools (Select Models Only) - Windows 7

Option Action
UEFI Boot Mode Enable or disable.
HDD Translation Mode Select Bit-shift or LBA-assisted.
Virtualization technology Enable or disable the option to allow multiple virtual machines to run
side by side on the same computer.
Built-in device options
Option Action
Wireless Button State Enable or disable.
Embedded WLAN Device Radio Enable or disable.
Fingerprint Device Enable or disable.
Notebook MultiBay Enable or disable.
Notebook Upgrade Bay Security Level Enable or disable.
Network Interface Controller (LAN) Enable or disable.
Ambient light sensor Enable or disable.
Integrated Camera Enable or disable.
Embedded Bluetooth® Device Radio Enable or disable.
Modem Device Enable or disable.
Microphone Enable or disable.
LAN/WLAN Switching Enable or disable.
Wake on LAN Enable or disable the option to turn on the computer remotely from
another computer connected to the same network.
AMT options (select models only)
Option Action
Firmware Verbosity Enable or disable.
AMT Setup Prompt (Ctrl-P) Enable or disable.
USB Key Provisioning Support Enable or disable.
Unconfigure AMT on next boot Enable or disable.
Terminal Emulation Mode Select ANSI or VT100.
Firmware Progress Event Support Enable or disable.
Security Level options
NOTE: These settings control the access level of HP ProtectTools users.
64 Chapter 6 BIOS Configuration for HP ProtectTools