User Manual

8–2 Startup and Reference Guide—Part 2
Hardware Options and Upgrades
Connecting a Powered Device
To connect the notebook to an optional external device that has a
power cord:
1. Be sure the device is turned off.
2. Connect the device to the jack or connector on the notebook
specified by the device manufacturer.
3. Plug the device power cord into a grounded electrical outlet.
4. Turn on the device.
✎
If a properly connected external monitor or other display device
does not display an image, try pressing the
Fn+F4 hotkeys to
switch the image to the new device.
To disconnect a powered external device from the notebook:
1. Turn off the device.
2. Disconnect the device from the notebook.
CPQ-311245-001.book Page 2 Thursday, March 27, 2003 10:17 PM