User Manual

1–8 Regulatory and Safety Notices
Regulatory Notices
Telecommunications Device Approvals
The telecommunications device in your notebook is approved
for connection to the telephone network in the countries whose
approval markings are indicated on the product label located on
the bottom of the notebook or on the modem.
Refer to the documentation included with the product to ensure
the product is configured for the country in which it is located.
Selecting a country other than the one in which it is located may
cause your modem to be configured in a way that violates the
telecommunication regulations/laws of that country. In addition,
your modem may not function properly if the correct country
selection is not made. If, when selecting a country, a message
appears that states that the country is not supported, this means
that the modem has not been approved for use in this country and
thus should not be used.
U.S. Modem Statements
This equipment complies with Part 68 of the FCC rules and
the requirements adopted by the ACTA. On the bottom of the
computer or on the modem is a label that contains, among
other information, a product identifier in the format
US:AAAEQ##TXXXX. If requested, this information must be
provided to the telephone company.
Applicable certification jack USOC = RJ11C. A plug and jack
used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68
rules and requirements adopted by the ACTA. A compliant
telephone cord and modular plug is provided with this product.
It is designed to be connected to a compatible modular jack that is
also compliant. See installation instructions for details.