Hardware Guide HP Compaq Notebook Series Document Part Number: 345582-001 December 2003 This guide explains how to identify and use notebook hardware features, including connectors for external devices. It also includes power and environmental specifications, which can be helpful when traveling with the notebook.
© 2003 Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and/or other countries. Intel and SpeedStep are trademarks of Intel Corporation in the U.S. and/or other countries. SD Logo is a trademark. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Contents 1 Notebook Features TouchPad Components . . . . . . . . . . . . . . . . . . . . . . . . . . 1–1 Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5 Left-Side Components . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–7 Right-Side Components . . . . . . . . . . . . . . . . . . . . . . . . . . 1–8 Front Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 3 Battery Packs Running the Notebook on Battery Power . . . . . . . . . . . . 3–1 Identifying Battery Packs. . . . . . . . . . . . . . . . . . . . . . . . . 3–2 Inserting or Removing a Primary Battery Pack . . . . . . . . 3–3 Inserting or Removing a MultiBay Battery Pack. . . . . . . 3–4 Charging a Battery Pack. . . . . . . . . . . . . . . . . . . . . . . . . . 3–6 Charging a New Battery Pack . . . . . . . . . . . . . . . . . . 3–7 Charging an In-Use Battery Pack . . . . . . . . . . . . . . .
Contents MultiBay Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7 Identifying the MultiBay Activity Light . . . . . . . . . . 4–7 Inserting a Drive into the MultiBay. . . . . . . . . . . . . . 4–8 Removing a Drive from the MultiBay. . . . . . . . . . . . 4–9 MultiBay Drive Media . . . . . . . . . . . . . . . . . . . . . . . . . . 4–10 Inserting an Optical Disc . . . . . . . . . . . . . . . . . . . . . 4–10 Removing an Optical Disc (With Power) . . . . . . . .
Contents 7 External Devices Connecting a Monitor or Projector . . . . . . . . . . . . . . . . . Using a USB Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . Enabling USB Legacy Support . . . . . . . . . . . . . . . . . Connecting an Optional External MultiBay. . . . . . . . . . . Connecting a 1394 Device . . . . . . . . . . . . . . . . . . . . . . . . Connecting an Optional Cable Lock . . . . . . . . . . . . . . . . 7–2 7–3 7–4 7–5 7–6 7–7 8 Hardware Upgrades Using Optional PC Cards . . . .
1 Notebook Features TouchPad Components Component Description 1 TouchPad Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling and double-clicking. 2 Left and right TouchPad buttons Function like the left and right buttons on an external mouse.
Notebook Features Top Components Component Description 1 When the notebook is: Power button* ■ Off, press and release to turn on the notebook. ■ In Standby, press and release to exit Standby. ■ In Hibernation, press and release to exit Hibernation. If the system has stopped responding and Microsoft Windows shutdown procedures cannot be used, press and hold for 5 seconds to turn off the notebook. *This table describes default settings.
Notebook Features Component Description 2 fn key Executes frequently used system functions when pressed in combination with a function key or the esc key. 3 Microsoft logo key Displays the Windows Start menu. 4 Quick Launch buttons (3) Enable you to access common functions with a single keystroke. ■ QuickLock button (left)—Disables the keyboard and pointing device and clears the display.
Notebook Features Component Description 6 Applications key Displays shortcut menu for items beneath the pointer. 7 Display release latch recesses (2) Secure the display when it is closed. Memory compartment (not shown; located under the keyboard) Contains one primary memory slot and one expansion slot. Hardware Guide ✎ One or both of the memory slots may be populated at the factory, depending on the amount of preinstalled memory on the notebook.
Notebook Features Lights Component Description 1 Num lock On: Num lock is on or the embedded numeric keypad is enabled. 2 Caps lock On: Caps lock is on. 3 Scroll lock On: Scroll lock is on. 4 Wireless On/Off On: An optional integrated wireless device has been enabled. 5 Power/Standby On: Power is turned on. Blinking: Notebook is in Standby. ✎ The light turns off when the system enters Hibernation or shuts down.
Notebook Features Component Description 6 Battery On: A battery pack is charging. Blinking: A battery pack that is the only available power source has reached a low-battery condition. When the battery reaches a critical low-battery condition, the battery light begins blinking more quickly. Off: AC power is applied with battery pack either fully charged or not installed, or no AC power is applied. 7 Primary hard drive On: Hard drive in the hard drive bay is being accessed.
Notebook Features Left-Side Components Component Description 1 Audio line-out jack Produces system sound when connected to optional powered stereo speakers, headphones, headset, or television audio. 2 Microphone jack Connects optional external monaural or stereo microphones. 3 Hard drive bay Holds the primary hard drive. 4 MultiBay Holds a MultiBay device.
Notebook Features Right-Side Components Component Description 1 Battery bay Holds the primary battery pack. 2 Secure Digital (SD) slot Accepts SD Memory Cards. 3 PC Card slots (2) Support optional Type I, Type II, or Type III 32-bit (CardBus) or 16-bit PC Cards. 4 RJ-11 telephone jack Connects a modem cable. 5 Bluetooth compartment Holds an optional wireless Bluetooth device. ✎ 6 Security cable slot Attaches an optional security cable to the notebook.
Notebook Features Front Components Component Description 1 Infrared port Provides wireless communication between the notebook and an optional Infrared Data Association (IrDA)-compliant device. 2 Mute button Mutes the system volume when pressed. The button lights up when volume is muted. 3 Volume control buttons Increase and decrease system volume. Press the volume up button (on right) to increase sound. Press the volume down button (on left) to decrease sound.
Notebook Features Component Description 5 Speakers (2) Produce system sound. 6 Wireless antennae (2) Transmit wireless data. Å WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized.
Notebook Features Rear Components Component Description 1 Enables airflow to cool internal components. Exhaust vent Ä To prevent overheating, do not obstruct vents. Using the notebook on a soft surface such as a pillow, blanket, rug, or thick clothing can block airflow. 2 AC power connector Connects an AC adapter or an optional Automobile Power Adapter/Charger or Aircraft Power Adapter. 3 Serial connector Connects an optional serial device.
Notebook Features Component Description 5 S-Video-out jack Connects an optional S-Video device, such as a television or an overhead projector. 6 External monitor connector Connects an optional external monitor or an overhead projector. 7 1394 connector Connects a device that requires high bandwidth, such as an optional digital camera or other video or audio device. 8 RJ-45 network jack Connects a network cable. 9 USB connectors (2) Connects USB 1.1- and 2.
Notebook Features Bottom Components Component Description 1 Keyboard access screws (2) Enable you to remove the keyboard to access system memory. 2 Intake vent Enables airflow to cool internal components. Ä To prevent overheating, do not obstruct vents. Using the notebook on a soft surface such as a pillow, blanket, rug, or thick clothing can block airflow.
Notebook Features Component Description 3 Holds an optional wireless LAN device. Mini PCI compartment Ä The FCC does not allow unauthorized Mini PCI devices to be used in this notebook. Installing an unsupported MiniPCI device can prevent your notebook from operating properly and can result in a warning message. To resume proper notebook operation, remove the unauthorized device. Contact your Customer Care Center if a warning message about your MiniPCI device displays in error.
Notebook Features Labels The labels affixed to the bottom of the notebook and to the inside of the battery compartment provide information you may need when you troubleshoot system problems or travel abroad with the notebook. ■ The Service Tag label affixed to the bottom of the notebook contains the product name, product number (P/N), and serial number (S/N). You will need the notebook serial number and product number if you call customer support.
2 Pointing Devices and Keyboard Using a Pointing Device Component Description 1 TouchPad Moves the pointer and selects or activates items on the screen. Can be set to perform other mouse functions, such as scrolling and double-clicking. 2 Left and right TouchPad buttons Function like the left and right buttons on an external mouse.
Pointing Devices and Keyboard Using the TouchPad To move the pointer, slide your finger across the TouchPad surface in the direction you want the pointer to go. Use the left and right TouchPad buttons as you would the left and right buttons on an external mouse. Using an External Mouse An external USB mouse can be connected to the notebook using one of the connectors on the back panel.
Pointing Devices and Keyboard Using Hotkeys and Shortcut Keys Hotkeys and shortcut keys, which are preset combinations of the fn key and another key, execute frequently used system functions. Identifying fn and Function Keys Component 1 Function keys (5) 2 fn key ■ A hotkey is a combination of the fn key and one of the function keys. The icons on the function keys represent the hotkey functions available on your notebook.
Pointing Devices and Keyboard Hotkey and Shortcut Key Quick Reference Function Key Combination to Activate Function Key Combination to Deactivate Function Initiate Standby fn+f3 Power button Switch between notebook display and external display fn+f4 fn+f4 View battery information fn+f8 fn+f8 Decrease screen brightness fn+f9 N/A Increase screen brightness fn+f10 N/A Display system information fn+esc fn+esc Initiating Standby (fn+f3) ■ When the notebook is on, press the fn+f3 hotkey to
Pointing Devices and Keyboard Switching Displays (fn+f4) The fn+f4 hotkey switches the image among display devices connected to the external monitor connector or the S-Video-out jack on the notebook. For example, if an external monitor is connected to the notebook, pressing the fn+f4 hotkey multiple times will toggle the image between the notebook display and an external display. The Intel Extreme Graphics 2 for Mobile display utility offers additional configurations.
Pointing Devices and Keyboard Viewing Battery Charge Information (fn+f8) Press fn+f8 to display charge information for all installed battery packs. The display indicates which battery packs are charging and reports the amount of charge remaining in each battery pack. Battery pack locations are indicated by number: Location 1 is the primary battery pack. Location 2 is the optional MultiBay battery pack. ■ ■ Decreasing Screen Brightness (fn+f9) Press fn+f9 to decrease screen brightness.
Pointing Devices and Keyboard Using Quick Launch Buttons The 3 Quick Launch buttons enable you to perform common functions with a single keystroke. Component Description 1 QuickLock button Disables the keyboard and pointing device and clears the display. Before you can use QuickLock, you must set a password and select preferences. For more information, refer to the “Security” chapter in the Software Guide on the Documentation CD.
Pointing Devices and Keyboard Using Keypads The notebook has an embedded numeric keypad and also supports an optional external keypad or an optional external keyboard that includes a numeric keypad. Using the Embedded Numeric Keypad The 15 keys of the embedded numeric keypad can be used like the keys on an external keypad. When the embedded numeric keypad is turned on, each key on the keypad performs the functions indicated by the icon in the upper right corner of the key.
Pointing Devices and Keyboard Enabling and Disabling the Embedded Numeric Keypad Press fn+num lk to enable the embedded numeric keypad. The num lock light turns on. Press fn+num lk again to return the keys to their standard keyboard functions. embedded numeric keypad does not work while an external ✎ The keyboard or keypad is connected to the notebook or to an optional port replicator.
Pointing Devices and Keyboard Using an External Keypad Most keys on most external keypads function differently, according to whether num lock mode is on or off. For example: ■ When num lock is on, most keypad keys type numbers. ■ When num lock is off, most keypad keys function like the arrow, page up, or page down keys. When the num lock mode on an external keypad is turned on, the num lock light on the notebook turns on.
Pointing Devices and Keyboard 4. Select or clear the Num Lock State at Boot check box: ❏ To enable num lock mode on an external keypad, select the field. ❏ To disable num lock mode on an external keypad, clear the field. 5. Press f10. 6. To save your preference and exit Computer Setup, select File > Save Changes and Exit, then follow the instructions on the screen. Your preference is set when you exit Computer Setup and takes effect when the notebook restarts.
3 Battery Packs Running the Notebook on Battery Power When the notebook is connected to external AC power, the notebook runs on AC power. When a charged battery pack is in the notebook and the notebook is not connected to external power, the notebook runs on battery power. The notebook switches between AC power and battery power according to the availability of an external AC power source.
Battery Packs If you will not be using the notebook for 2 weeks or more, remove the battery pack and store it as described in “Storing a Battery Pack” (later in this chapter) to prolong its life. For more information about leaving your work, refer to the “Power” chapter in the Software Guide on the Documentation CD. compatible AC adapters and battery packs should be used ✎ Only with the notebook. For additional information, visit the HP Web site at http://www.hp.
Battery Packs Inserting or Removing a Primary Battery Pack Ä CAUTION: To prevent loss of work when removing a battery pack that is the sole power source, initiate Hibernation or turn off the notebook before removing the battery pack. To insert a battery pack, turn the notebook upside down, then slide the battery pack into the battery bay until it is seated. To remove a battery pack, turn the notebook upside down.
Battery Packs Inserting or Removing a MultiBay Battery Pack Ä CAUTION: To prevent loss of work when removing a battery pack that is the sole power source, initiate Hibernation or turn off the notebook before removing the battery pack. To insert an optional MultiBay battery pack, turn the notebook upside down, then slide the battery pack into the MultiBay until it is seated.
Battery Packs To remove a MultiBay battery pack, turn the notebook upside down. Then slide and hold the MultiBay release latch 1 as you pull the battery pack 2 from the MultiBay. Ä CAUTION: To prevent damage to the MultiBay when no device is in the MultiBay, insert the weight saver to protect the bay opening. The weight saver can be inserted or removed while the notebook is on, off, in Standby, or in Hibernation.
Battery Packs Charging a Battery Pack All battery packs inserted into the notebook charge whenever the notebook is connected to external power through an AC adapter or an optional Automobile Power Adapter/Charger. optional Aircraft Power Adapter can be used to run the ✎ An notebook, but it cannot be used to charge a battery pack. A battery pack can charge whether the notebook is off or in use, but it will charge faster when the notebook is off.
Battery Packs Charging a New Battery Pack Fully charge the battery pack while the notebook is connected to external power through the AC adapter. A new battery pack that has been partially but not fully charged can run the notebook, but the battery charge indicators might be inaccurate. Charging an In-Use Battery Pack To prolong battery life and increase the accuracy of battery charge indicators: ■ Allow a battery pack to discharge to 10 percent of a full charge through normal use before charging it.
Battery Packs Monitoring the Charge in a Battery Pack This section explains several ways you can determine the amount of charge in your battery pack. Obtaining Accurate Charge Information To increase the accuracy of all battery charge displays: ■ Allow a battery pack to discharge to about 10 percent of a full charge through normal use before charging it. See “Accessing Charge Information” later in this chapter. ■ When you charge a battery pack, charge it fully.
Battery Packs Accessing Charge Information To access information about the status of any battery pack in the notebook, do one of the following: ■ Select the Power icon on the taskbar. ■ Press fn+f8. ■ Access the Power Meter tab: ❏ In Windows XP, select Start > Control Panel > Performance and Maintenance > Power Options icon > Power Meter tab. ❏ In Windows 2000, select Start > Settings > Control Panel > Power Options icon > Power Meter tab.
Battery Packs Displaying Charge Information on a MultiBay Battery Pack You can determine the percentage of a full charge remaining in a battery pack that is not inserted into the MultiBay by using the battery Quick Check feature. MultiBay battery packs have battery Quick Check. Primary battery packs do not. To display the percentage of a full charge remaining in a MultiBay battery pack, press the Quick Check button 1 on the MultiBay battery pack.
Battery Packs Managing Low-Battery Conditions Some low-battery condition alerts and system responses can be changed in the Power Options window of the operating system. The information in this section describes the alerts and system responses set at the factory. Preferences set in the Power Options window do not affect lights. Identifying Low-Battery Conditions This section explains how to identify low and critical low-battery conditions.
Battery Packs Resolving Low-Battery Conditions Ä CAUTION: If the notebook has reached a critical low-battery condition and has initiated Hibernation, do not restore power until the Power/Standby light turns off. When External Power Is Available To resolve a low-battery condition when external power is available, do one of the following: ■ Connect the AC adapter. ■ Plug an optional Automobile Power Adapter/Charger into the notebook and into a vehicle cigarette lighter receptacle.
Battery Packs Calibrating a Battery Pack This section describes when and how to calibrate a battery pack. When to Calibrate Even if a battery pack is heavily used, it should not be necessary to calibrate it more than once a month. It is not necessary to calibrate a new battery pack before first use. Calibrate the battery pack under the following conditions: ■ When battery charge displays seem inaccurate. ■ When you observe a significant change in battery run time.
Battery Packs Discharging the Battery Pack Before you begin a full discharge, disable Hibernation. To disable Hibernation: 1. Open the Power Options window: ❏ In Windows XP, select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. ❏ In Windows 2000, select Start > Settings > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. 2. Clear the Enable Hibernation check box. The notebook must remain on while the battery pack is being discharged.
Battery Packs To fully discharge a battery pack: 1. Select the Power icon on the taskbar, or access the Power Schemes tab: ❏ In Windows XP, select Start > Control Panel > Performance and Maintenance > Power Options icon > Power Schemes tab. ❏ In Windows 2000, select Start > Settings > Control Panel > Power Management icon > Power Schemes tab. 2. Make a note of the 2 settings in the Plugged In column and the 2 settings in the Running on Batteries column so that you can reset them after the calibration.
Battery Packs 3. Access the Power Schemes tab: ❏ In Windows XP, select Start > Control Panel > Performance and Maintenance > Power Options icon > Power Schemes tab. ❏ In Windows 2000, select Start > Settings > Control Panel > Power Management icon > Power Schemes tab. 4. Refer to the settings you recorded earlier. Re-enter the settings that you recorded for the items in the Plugged In column and the Running on Batteries column. 5. Click the OK button.
Battery Packs Battery Conservation Procedures and Settings Using the battery conservation procedures and settings described below extends the time that a battery pack can run the notebook from a single charge. Conserving Power as You Work To conserve power as you use the notebook: ■ Turn off wireless and LAN connections and exit modem applications when you are not using them. ■ Disconnect external devices you are not using that are not connected to an external power source.
Battery Packs Selecting Power Conservation Settings To set the notebook to conserve power: ■ Select a short wait for the screen saver and select a screen saver with minimal graphics and motion. To access screen saver settings: ❏ In Windows XP, select Start > Control Panel > Appearance and Themes > Display icon > Screen Saver tab. ❏ In Windows 2000, select Start > Settings > Control Panel > Display > Screen Saver tab. ■ Select a Power Scheme with low-power-use settings through the operating system.
Battery Packs Storing a Battery Pack If a notebook will be unused and unplugged for more than 2 weeks, remove any battery packs and store them separately. Ä CAUTION: To prevent damage to a battery pack, do not expose it to high temperatures for extended periods of time. High temperatures accelerate the self-discharge rate of a stored battery pack. To prolong the charge of a stored battery pack, place it in a cool, dry place.
Battery Packs Disposing of a Used Battery Pack Å WARNING: There is a risk of fire and chemical burn if a battery pack is handled improperly. Do not disassemble, crush, or puncture a battery pack or short the contacts on a battery pack. Do not expose a battery pack to temperatures higher than 60°C (140°F) or dispose of a battery pack in water or fire. When a battery pack has reached the end of its useful life, do not dispose of it in general household waste.
4 Drives Caring for Drives Drives are fragile notebook components that must be handled with care. The following cautions apply to all drives. Additional cautions are included in the procedures to which they apply. Ä■ CAUTION: To prevent loss or damage to the notebook or a drive: ■ ■ ■ ■ ■ ■ Handle a drive carefully. Do not drop it. Excessive force can damage drive connectors. When you insert a drive, use only enough force to seat the drive.
Drives Adding a Drive to the System Removable drives enable you to store and access data. ■ A standard drive can be added to the system by inserting the drive into the notebook MultiBay or optional Advanced Port Replicator. ■ A diskette drive can also be added. ■ A USB drive can be added by connecting the drive to a USB connector on the notebook or optional Port Replicator. For information about connecting a USB drive, see the “External Devices” chapter in this guide.
Drives Hard Drive This section discusses the primary hard drive of the notebook. Identifying the Hard Drive Activity Light The hard drive activity light turns on when the primary hard drive is being accessed.
Drives Removing and Installing a Primary Hard Drive The hard drive that is in the hard drive bay is the primary hard drive. The following sections describe how to remove and install the primary hard drive. Before You Begin 1. Save your work, exit all applications, and shut down the notebook. If you are not sure whether the notebook is off or in Hibernation, briefly press the power button. If your work returns to the screen, save your work, exit all applications, and then shut down the notebook. 2.
Drives 5. To remove the hard drive, lift the hard drive door 1, and pull the hard drive 2 out of the bay. 6. If you are not installing a hard drive at this time, put the hard drive retaining screw and hard drive security screw in a safe place. Installing the Primary Hard Drive To install a hard drive: 1. Follow the procedure in the “Before You Begin” section. 2. Lift the hard drive door 1. 3. Slide the hard drive 2 into the bay until the drive is seated.
Drives 4. Reinsert the hard drive security screw 1 and hard drive retaining screw 2.
Drives MultiBay Drive This section explains how to use optional drives in the notebook MultiBay. Identifying the MultiBay Activity Light The MultiBay activity light turns on when any MultiBay device is active, with the exception of the MultiBay battery pack.
Drives Inserting a Drive into the MultiBay inserting a hard drive into the MultiBay, insert the drive ✎ Before into a MultiBay hard drive adapter (purchased separately). 1. Turn the notebook upside down. 2. With the connector on the drive or drive assembly facing the MultiBay, slide the drive or drive assembly into the MultiBay until it is seated.
Drives Removing a Drive from the MultiBay Ä CAUTION: To prevent system lockup and loss of information, stop the drive before removing it. To stop the drive: ■ ■ Ä Windows XP—Select the Safely Remove Hardware icon on the taskbar, then select the drive you want to remove. When it is safe to remove the drive, a message is displayed. (To display taskbar icons, select Show Hidden Icons in the system tray.
Drives MultiBay Drive Media This section provides information on using optional optical disc drives (such as CD-ROM and DVD drives) and optional diskette drives in the MultiBay. Inserting an Optical Disc 1. Turn on the notebook. 2. Press the release button 1 on the drive bezel to release the media tray. 3. Pull out the tray 2 until it is fully extended. Position a CD or one-sided DVD over the tray with the label side up. 4. Gently press the disc 3 onto the tray spindle until the disc snaps into place.
Drives Removing an Optical Disc (With Power) If power is available: 1. Turn on the notebook. 2. Press the release button 1 on the drive bezel to release the media tray, then pull the tray 2 out until it is fully extended. 3. Remove the disc 3 from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Handle the disc by the edges, not the flat surfaces. If the media tray is not fully extended, tilt the disc as you remove it. 4.
Drives Removing an Optical Disc (No Power) If power is unavailable: 1. Insert the end of a paper clip 1 into the manual eject recess in the front bezel of the drive. 2. Press in gently on the paper clip until the media tray is released, then pull out the tray 2 until it is fully extended. 3. Remove the disc 3 from the tray by gently pressing down on the spindle while lifting the outer edges of the disc. Handle the disc by the edges, not the flat surfaces.
Drives Displaying Optical Disc Contents AutoPlay is enabled by default on the notebook. When an optical disc is inserted into a drive and AutoPlay is enabled, the contents of the disc display on the screen automatically. To display the contents of a disc when Autorun is not enabled: 1. Click Start > Run, then enter: X: where X = the designation of the drive containing the disc. 2. Press enter.
Drives Resuming From Standby or Hibernation Ä CAUTION: To prevent possible video degradation and loss of audio or video playback functionality, do not initiate Standby or Hibernation while playing any media. If Standby or Hibernation is accidentally initiated while a drive medium (such as a diskette, CD, CD-RW, DVD, or DVD+RW) is in use, the following results can occur: ■ Your playback might be interrupted.
5 Audio and Video Using Audio Features The notebook includes the audio components described in the following table. Component Description 1 Audio line-out jack Connects optional powered stereo speakers, headphones, headset, or television audio. 2 Microphone jack Connects optional external monaural or stereo microphones.
Audio and Video Component Description 3 Mute buttons Mutes the system volume. 4 Volume buttons (2) Adjust the system volume. Press the volume up button to increase sound. Press the volume down button to decrease sound. 5 Speakers (2) Produce system sound. Using the Audio Line-Out Jack Å Ä WARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones or a headset.
Audio and Video Using the Microphone Jack When connecting a microphone to the microphone jack, use a single-sound channel (monaural) or dual-sound channel (stereo) microphone with a 3.5-mm plug. Monaural or stereo electret condenser microphones are recommended. ■ If you connect a monaural microphone, the recorded sound will be the same on both channels. ■ If you connect stereo microphones and clear the Noise Reduction check box in the SoundMAX Control Panel, the recorded sound will be in stereo.
Audio and Video Adjusting the Volume To adjust the volume, use any of the following controls: ■ ■ Notebook volume buttons ❏ To mute or restore volume, press the mute button. You can also mute or restore volume by pressing the volume up and volume down buttons simultaneously. ❏ To decrease the volume, press the volume down button. ❏ To increase the volume, press the volume up button. Windows Volume Control ❏ In Windows XP: a.
Audio and Video Using Video Features The notebook features an S-Video-out jack which connects the notebook to an optional S-Video device, such as a television or overhead projector. The notebook can support one S-video device connected to the S-video out jack while simultaneously supporting an image on the notebook display or external display attached to the external monitor connector. The S-video-out connection usually provides a higher quality image than a composite-video connection.
Audio and Video Using the S-Video-Out Jack To connect a video device to the S-Video-out jack: 1. Plug either end of the S-Video cable 1 into the S-Video-out jack on the notebook. 2. Connect the other end of the cable 2 to the video device as instructed in the documentation included with the device.
6 Communication Devices Connecting a Modem Cable A modem cable, which has a 6-pin RJ-11 connector at each end, must be connected to an analog telephone line with, in some countries, the use of a country-specific modem adapter. Modem cables are provided with most notebooks, but may be purchased separately from most electronic retailers. Some notebooks may have been purchased without an internal modem. Å WARNING: Connecting the notebook to a digital line can permanently damage the modem.
Communication Devices Ä Ä CAUTION: Jacks for digital PBX systems might resemble analog telephone jacks but are not compatible with the modem. CAUTION: Built-in modems may not work with multiple phone lines or a private branch exchange (PBX), cannot be connected to a coin-operated telephone, and do not work with party lines. Some of these connections may result in excess electrical voltage and could cause a malfunction in the internal modem.
Communication Devices Connecting the RJ-11 Modem Cable To connect an RJ-11 modem cable: 1. If your notebook is equipped with an internal modem, plug the modem cable 1 into the RJ-11 telephone jack on the notebook. Å To reduce the risk of electrical shock, fire, or damage to the equipment, do not plug a modem cable into the RJ-45 network jack. 2. Plug the modem cable 2 into the RJ-11 telephone jack.
Communication Devices Using a Country-Specific Adapter Cable Telephone jacks vary by country. To use the modem and the RJ-11 telephone cable outside the country in which you purchased the notebook, you must obtain a country-specific modem adapter. Refer to the Modem and Networking guide on the Documentation CD for more details about using your notebook internationally. To connect the modem to an analog telephone line that does not have an RJ-11 telephone jack: 1.
Communication Devices Connecting a Network Cable A network cable has an 8-pin RJ-45 connector at each end. A network cable is provided with most notebooks, but may be purchased separately from most electronics retailers. If the network cable contains noise suppression circuitry, which prevents interference from TV and radio reception, orient the circuitry end of the cable toward the notebook.
Communication Devices To connect the network cable: 1. Check that the existing LAN supports Ethernet 10BASE-T/100BASE-TX connections. 2. Plug the network cable 1 into the RJ-45 network jack on the notebook. 3. Plug the other end of the cable 2 into a network jack. 4. Start or restart the notebook. Windows Help for information about setting up and using ✎ See LAN connections. Select Start > Help and Support. Contact your network administrator for network information.
Communication Devices Linking to an Infrared Device The notebook is IrDA-compliant—4-Mbps standard—and can communicate with another infrared-equipped device that is also IrDA compliant. The infrared port supports both low-speed connections of up to 115 Kbps and high-speed connections of up to 4 Mbps. Infrared performance may vary depending on the performance of infrared peripherals, distance between infrared devices, and applications used.
Communication Devices Setting Up an Infrared Transmission For information about using infrared software, refer to your operating system Help file. To set up infrared devices for optimal transmission: ■ Prepare the infrared ports on both devices for transmission. ■ Position the devices so that their infrared ports face each other at a distance no greater than 1 meter (3.3 feet). ■ Position the ports so that they face each other directly.
7 External Devices The jacks and connectors described in this guide support standard external devices. ■ For information about which jack or connector to use, refer to the documentation included with the device. ■ For information about installing or loading any software required by the device, such as drivers, refer to the documentation included with the device. To connect a standard external device to the notebook: 1. Turn off the notebook. 2.
External Devices Connecting a Monitor or Projector To connect an external monitor or projector to the notebook, insert the monitor cable 1 into the external monitor connector on the back of the notebook, and connect the other end of the cable 2 to a monitor or projector. a properly connected external monitor or projector does not ✎ Ifdisplay hotkey to switch the image to the an image, press the fn+f4 monitor.
External Devices Using a USB Device Two Universal Serial Bus (USB) connectors can be used to connect external USB 2.0 and USB 1.1 devices, such as a USB keyboard, mouse, drive, printer, scanner, hub, or external MultiBay to the notebook. To connect a USB device to the notebook, insert the USB cable 1 into the USB connector on the back of the notebook, and connect the other end of the cable 2 to the external device.
External Devices A USB device functions in the same way as a comparable non-USB device, with one exception. By default, USB devices do not function unless an operating system that supports USB is installed in the notebook. Some USB devices might require additional support software, which is usually included with the device. For more information and software installation instructions, refer to the documentation included with the device.
External Devices Connecting an Optional External MultiBay An external MultiBay connects to the notebook by means of the USB connector and enables you to use MultiBay drives. For more information about external MultiBay drives, refer to the documentation that is included with such devices.
External Devices Connecting a 1394 Device The IEEE 1394 connector can be used to connect an external device such as a digital camera, a digital camcorder, a high-speed storage device, or a scanner to the notebook. Some 1394 devices might require additional support software, which is usually included with the device. For more information and software installation instructions, refer to the documentation included with the device.
External Devices Connecting an Optional Cable Lock purpose of security solutions is to act as a deterrent. These ✎ The solutions do not prevent the product from being mishandled or stolen. To install a security cable: 1. Loop the security cable around a secured object. 2. Insert the cable lock key 1 into the cable lock. 3. Insert the cable lock 2 into the security cable slot 3. 4. Turn the key and remove it from the cable lock.
8 Hardware Upgrades To order hardware or learn more about upgrades and accessories, visit the HP Web site at http://www.hp.com or refer to Worldwide Telephone Numbers booklet, included with the notebook, to contact an HP authorized dealer, reseller, or service provider. For information about obtaining and installing software updates and upgrades, refer to the “Software Updates and Restorations” chapter in the Software Guide on the Documentation CD.
Hardware Upgrades Inserting a PC Card Ä■ CAUTION: To prevent damage to the connectors: ■ Use minimal pressure when inserting a PC Card into a PC Card slot. Do not move or transport the notebook while a PC Card is inserted. 1. Hold the PC Card label side up with the connector facing the notebook. 2. Gently push the PC card into the slot until the card is seated. The notebook will beep to indicate that a device has been detected.
Hardware Upgrades Removing a PC Card Ä CAUTION: To prevent loss of work or an unresponsive system, stop the PC Card before removing it. 1. Stop the PC Card: ❏ In Windows XP—Select the Safely Remove Hardware icon on the taskbar, then select the PC Card. (To display the Safely Remove Hardware icon, right-click the taskbar and select Show Hidden Icons.) ❏ In Windows 2000—Select the Unplug or Eject icon on the taskbar, then select the PC Card you plan to remove.
Hardware Upgrades Using SD Cards Secure Digital (SD) Cards are removable thumbnail-sized compact flash storage devices that provide a convenient method of storing data and sharing it with other devices such as PDAs, cameras, and other SD-equipped PCs. Inserting an SD Card Ä■ CAUTION: To prevent damage to the connectors: ■ Use minimal pressure when inserting an SD Card into an SD Card slot. Do not move or transport the notebook while an SD Card is inserted. To insert an SD Card: 1.
Hardware Upgrades Removing an SD Card Ä CAUTION: To prevent loss of work or system lockup, stop the SD Card before removing it. To remove an SD Card: 1. Close all files and applications that are using the SD Card. 2. Stop the SD Card: Ä ❏ In Windows XP, select the Safely Remove Hardware icon in the taskbar, then select the PC Card. (To display the Safely Remove Hardware icon, right-click the taskbar and select Show Hidden Icons.
Hardware Upgrades 3. Gently press in on the SD Card 1 to unseat it. 4. Pull the SD Card 2 from the slot. Adding and Upgrading Memory Modules Å WARNING: The memory compartments are the only user-accessible internal compartments on the notebook. All other areas that require a tool to open should be opened only by an authorized service provider.
Hardware Upgrades The notebook has 2 memory slots, one on top of the other, located under the keyboard. The memory expansion slot 1 is on top of the primary memory slot 2. One or both of these slots may be populated at the factory. The memory capacity of the notebook can be upgraded by adding a memory module to the expansion slot or by upgrading the existing memory module in the primary memory slot. Before You Begin 1. Save your work, exit all applications, and shut down the notebook.
Hardware Upgrades Removing the Memory Module To remove a memory module: 1. Follow the procedure in the “Before You Begin” section. 2. Remove the 2 keyboard access screws from the bottom of the notebook. (A keyboard icon is located next to both keyboard access screws.
Hardware Upgrades 3. Open the notebook and slide the 4 keyboard latches down 1 to release the keyboard, then tilt the keyboard up 2 and remove it from the notebook.
Hardware Upgrades 4. Press in on the latch 1 to release the memory slot cover 2, then tilt it up and remove it from the notebook. If you are replacing the existing memory in the primary memory slot, you must remove any memory in the memory expansion slot first. Proceed to step 5. If you are adding memory to the memory expansion slot, see “Adding a Memory Module” later in this chapter.
Hardware Upgrades 5. To remove a memory module from the memory expansion slot: a. Pull the retention clips 1 away from each side of the module. The module tilts upward when released. b. Lift the edge of the memory module 2 and gently remove it from the slot. Ä To protect a memory module after it has been removed, place it in a static-safe container. Repeat step 5 to remove the memory module from the primary memory slot, if necessary.
Hardware Upgrades Adding a Memory Module 1. Follow the procedures in the “Before You Begin” section. 2. To insert the new memory module into either memory slot: a. Align the keyed (notched) edge of the module 1 with the keyed area in the expansion slot. b. Press the module into the slot from a 45-degree angle until it is seated, then press the module 2 downward until the retention clips snap into place. 3. Replace the memory slot cover. 4.
Hardware Upgrades Effects of Increasing Memory When memory increases, the operating system increases the hard drive space reserved for the Hibernation file. If you experience problems with Hibernation after memory has been increased, verify that your hard drive has enough free space to accommodate a larger Hibernation file. ■ To display the amount of memory (RAM) in the system: ❏ Press fn+esc. ❏ In Windows XP, select Start > Control Panel > Performance and Maintenance > System > General tab.
9 Specifications The information in this chapter might be helpful if you plan to use or transport the notebook internationally or in extreme environments. only compatible AC adapters and battery packs with the ✎ Use notebook. For additional information, visit the HP Web site at http://www.hp.com or use the Worldwide Telephone Numbers booklet, included with your notebook, to contact an HP authorized dealer.
Specifications Notebook Dimensions Dimension Metric U.S. Height 3.66 cm 1.44 in Width 32.59 cm 12.83 in Depth 27.51 cm 10.83 in Operating Environment Factor Metric U.S.
Specifications Rated Input Power Input power Rating Operating voltage 100 to 120/220 to 240 VAC RMS Operating current 1.7/0.85 A RMS Operating frequency range 47 to 63 Hz AC When powered by a DC source 18.5 V MAX ✎ This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 Vms. Modem Specifications This notebook has been tested and found to comply with the limits for a Class B digital device.
Index 1394 connector 1–12 B A battery bay device supported 3–2 inserting battery pack 3–3 location 1–8 release latch 1–14 removing battery pack 3–3 battery charge information displays hotkey 2–6 in Windows 3–9 increasing accuracy 3–8 interpreting 3–9 on MultiBay battery pack 3–10 battery light 1–6 battery packs battery light 1–6 calibrating 3–13 charging 3–6 discharge sequence 3–7 disposal and recycling 3–20 disposing of 3–20 identifying 3–2 inserting 3–3 management, more information 3–20 monitoring char
Index MultiBay 3–2, 3–4, 4–2 primary 3–2, 3–3 removing 3–3 storing 3–1, 3–19 See also battery power battery power conserving 3–17 low-battery conditions 3–11 running notebook on 3–1 See also battery packs battery release latch 1–14 battery slot 1–8 battery, primary bay 1–8 release latch 1–8 bay.
Index conserving power 3–17 country-specific modem cable adapter 6–4 critical low-battery condition identifying 3–11 restoring from 3–12 D device drivers external devices 7–1 PC Card 8–1 digital vs.
Index changing screen brightness 2–6 displaying system information 2–6 initiating Standby 2–4 location 1–3, 2–3 switching displays 2–5 viewing battery charge information 2–6 function keys battery charge information 2–6 changing screen brightness 2–6 initiating Standby 2–4 location 1–3 overview 2–3 switching displays 2–5 file space requirements for 8–13 initiating 2–4 initiating during critical low-battery condition 3–11 hotkeys battery charge information 2–6 changing screen brightness 2–6 defined 2–3 init
Index keypads enabling/disabling num lock 2–9, 2–10 external 2–10 internal 2–8 keys applications 1–4 embedded keypad 2–8 fn 1–3, 2–3, 2–8 function 1–3, 2–3 hotkeys 2–3 Microsoft logo 1–3 num lk 2–8 shortcut keys 2–3 L labels 1–15 latches battery release 1–14 display release 1–4, 1–9 MultiBay release 1–14 lights battery 1–6 caps lock 1–5 IDE drive 4–4 MultiBay 1–6 num lock 1–5 power/Standby 1–5 primary hard drive 1–6 scroll lock 1–5 Wireless On/Off 1–5 low-battery conditions identifying 3–11 resolving 3–12
Index N network cable 6–3, 6–5 network jack 1–12 noise suppression circuitry 6–2, 6–5 num lk key 2–8 num lock light 1–5 numeric keypad 2–8 O operating environment specfications 9–2 optical disc inserting 4–10 removing 4–11, 4–12 overhead projector connecting 1–12, 7–2 switching image to or from 7–2 overhead projector connector 1–12 P parallel connector 1–11 PC Card enablers and card and socket services 8–1 inserting 8–2 removing 8–3 slots 1–8 stopping 8–3 supported types 8–1 zoomed video 8–1 PC Card butt
Index R RAM (random access memory) See memory regulatory information 9–3 release latches battery 1–14 display 1–9 MultiBay 1–14 RJ-11 modem jack 1–8 RJ-45 network jack 1–12 S scroll lock light 1–5 SD (Secure Digital) Card inserting 8–4 removing 8–5 SD (Secure Digital) Card slot 1–8, 8–4 security cable lock 7–7 security cable slot 1–8 security features 7–7 serial connector 1–11 shortcut keys defined 2–3 quick reference table 2–4 system information 2–6 with external keyboards 2–6 See also hotkeys Sleep 2–4
Index traveling with the notebook Aircraft Power Adapter 3–12 Automobile Power Adapter/Charger 3–12 battery pack temperature considerations 3–19 environmental operating considerations 9–2 preventing damage to connectors 8–2, 8–4 protecting drives 4–1 U USB hubs 7–3 legacy support 7–4 USB connector 1–12 Hardware Guide V VCR connecting audio 5–2 connecting video 5–6 switching image to or from 5–5 vents exhaust 1–11 intake 1–13 video devices S-Video jack 1–12, 5–6 switching displays 7–2 volume control butt
