HP ProBook 4525s Notebook PC - Maintenance and Service Guide

f. Display assembly (see Display assembly on computers with 15.6-in displays on page 74)
g. Palm rest (see
Palm rest on page 69)
h. Hard drive (see
Hard drive on page 72)
i. Top cover (see
Top cover on page 81)
Remove the power connector assembly:
1. Position the computer right-side up with the right side toward you.
2. Disconnect the cable from the system board (1) and remove the tape and cable from the routing
channel in the base enclosure.
3. Lift the power connector (2) from the base enclosure.
Reverse this procedure to install the power connector.
98 Chapter 4 Removal and replacement procedures