Installing SATA Drivers on HP Notebook PCs - White Paper

ManualsBrandsHP ManualsDesktopsHP ProBook 4520s Notebook PC

Installing SATA Drivers

on HP Notebook PCs

Technical white paper

Table of contents

Introduction ................................................................................................................................... 2

Purpose .................................................................................................................................... 2

Audience .................................................................................................................................. 2

Benefits of SATA ........................................................................................................................ 2

System Requirements and Prerequisites ............................................................................................. 2

System prerequisites ................................................................................................................... 2

Adding SATA drivers to RIS Installation Points ................................................................................... 3

Where these guidelines are applicable ......................................................................................... 3

Steps to add SATA drivers to the distribution point ......................................................................... 3

Adding SATA Drivers to an Installation CD ....................................................................................... 5

Where these guidelines are applicable ......................................................................................... 5

Steps to add SATA drivers to the CD ............................................................................................ 5

Using OSCDIMG (or CDIMAGE) and CDBURN (command line utilities from Microsoft) ...................... 7

Adding SATA Drivers to WinPE 2005 .............................................................................................. 8

Where these guidelines are applicable ......................................................................................... 8

Steps to add SATA drivers to WinPE 2005 ................................................................................... 8

Modifying a Windows XP installation to support SATA Native Mode ................................................. 10

Where these guidelines are applicable ....................................................................................... 10

Steps to modify a Windows XP image to support SATA Native Mode ............................................ 10

How to Obtain SATA Device IDs ................................................................................................... 14

Where these guidelines are applicable ....................................................................................... 14

Steps to obtain the SATA Device ID from a Windows XP image ..................................................... 14

Steps to obtain the SATA Device ID from a Windows Vista image ................................................. 17

For more information .................................................................................................................... 20

Summary of content (20 pages)

PAGE 1
Installing SATA Drivers on HP Notebook PCs Technical white paper Table of contents Introduction ................................................................................................................................... 2 Purpose .................................................................................................................................... 2 Audience ..................................................................................................................................
PAGE 2
Introduction Purpose This white paper provides instructions on how to successfully incorporate SATA drivers into a Windows XP installation on HP Notebook PC models. The following guidelines provide procedures for adding SATA drivers to RIS installation points; adding SATA drivers to installation CDs; building an image and switching to SATA AHCI mode; using Sysprep with SATA in AHCI or NATIVE mode; and adding SATA drivers using WinPE. Audience This white paper is for use by HP personnel and customers.
PAGE 3
2) Obtain the SATA Device ID as described in the section “How to Obtain SATA Device IDs” of this document and insert them where [SATA Device ID] is seen below. Add the following section to your c:\sysprep\sysprep.inf file: [SysprepMassStorage] [SATA Device ID] = %systemdrive%\drivers\sata\iaahci.inf ; [optional description] [SATA Device ID]= %systemdrive%\drivers\sata\iastor.inf ; [optional description] Please note that each line to be added starts with PCI\.
PAGE 4
2) Unpack all the files from the SoftPaq. Unpacking a Softpaq file uses this command line: • Sp#####.exe -e -f -s • Where o SP####.exe is the Softpaq to unpack. o -e is a run time switch that overrides installation of the component inside the softpaq. o -f is a run time switch that overrides the default path set at build time. o -s instructs the package to unpack in silent mode skipping the welcome, license and directory screens. • Example: C:\tmp\sp99999.exe -e -fc:\sp99999 -s • This will
PAGE 5
iaSTOR.inf=1,,,,,,,20,0,0 [HardwareIdsDatabase] [SATA Device ID1] = "iaStor" [SATA Device ID2] = "iaStor" [SATA Device ID3] = "iaStor" [SATA Device ID4] = "iaStor" [SATA Device ID...] = "iaStor" [SCSI.Load] iaStor = iaStor.sys,4 [SCSI] iaStor = "Intel(R) 82801 SATA RAID/AHCI Controller (ICH5,6,7)" 3) Save the file and exit notepad. 4) Open any other .sif file(s) in the path: RemoteInstall\Setup\\Images\\i386\xxxx.
PAGE 6
• Sp#####.exe -e -f -s • Where o SP####.exe is the Softpaq to unpack. o -e is a run time switch that overrides installation of the component inside the softpaq. o -f is a run time switch that overrides the default path set at build time. o -s instructs the package to unpack in silent mode skipping the welcome, license and directory screens. • Example: C:\tmp\sp99999.exe -e -fc:\sp99999 -s • This will unpack the files needed to c:\sp99999.
PAGE 7
[SATA [SATA [SATA [SATA [SATA Device Device Device Device Device ID1] = "iaStor" ID2] = "iaStor" ID3] = "iaStor" ID4] = "iaStor" ID...] = "iaStor" [SCSI.Load] iaStor = iaStor.sys,4 [SCSI] iaStor = "Intel(R) 82801 SATA RAID/AHCI Controller (ICH5,6,7)" 12) Save the file and exit notepad. 13) Extract the files from c:\xpcd\support\tools\deploy.cab to c:\deploytools 14) Create a new winnt.sif: a. Execute setupmgr.exe (extracted from deploy.cab in step 13). b. Select “Create new answer file” c.
PAGE 8
Adding SATA Drivers to WinPE 2005 Where these guidelines are applicable IMPORTANT: Follow the installation instructions in the order provided. Failure to complete these steps in the proper order can result in an unsuccessful or unstable installation. This section provides guidelines for customers who need to add SATA support to a WinPE ISO or DOK. Steps to add SATA drivers to WinPE 2005 1) Create the WinPE folder (these guidelines will use c:\winpe) 2) Download and save the "Intel Matrix Storage Manager"
PAGE 9
6) Copy the other files to the c:\winpe\i386\system32\drivers folder. 7) Open c:\winpe\i386\txtsetup.sif in Notepad. Go to the end of the file. There will be several blank lines 1) Move the cursor up a few lines. This is necessary because there is a hidden marker at the end of the file. 2) Add the following lines to the txtsetup.sif.
PAGE 10
Modifying a Windows XP installation to support SATA Native Mode Where these guidelines are applicable IMPORTANT: Follow the installation instructions in the order provided. Failure to complete these steps in the proper order can result in an unsuccessful or unstable installation. This section provides guidelines for customers who have built an image with SATA AHCI Native Mode disabled in F10 Setup, and need to modify the image to support SATA AHCI Native Mode enabled (the default mode).
PAGE 11
Only for Compaq 320, Compaq 321, Compaq 420, Compaq 421, Compaq 620, Compaq 621, HP 420 and HP 620: 5) Download and run the “Intel Chipset Installation Utility” for your particular model from www.hp.com. 6) In Device Manager, expand the IDE ATA/ATAPI controllers. Select the Intel(R) ICH9M/M-E 2 port Serial ATA Storage Controller 1, and then right click and select ‘Update Driver’. If more than one Serial ATA Storage Controller is listed this process only needs to be done once.
PAGE 12
Update. b. At the next dialog, select ‘Install from a list or specific location (Advanced). c. At the next dialog, select ‘Don’t search. I will choose the driver to install’. d. When prompted to select the device driver you want to install for this hardware, choose the Intel(R) 5 Series/3400 Series Chipset Family 4 port Serial ATA Storage Controller. e.
PAGE 13
6) Open a blank text file in notepad and input the following: a. For XP 32-bit: REGEDIT4 [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\CriticalDeviceDatab ase\pci#ven_1002&cc_0106] "Service"="ahcix86" "ClassGUID"="{4D36E97B-E325-11CE-BFC1-08002BE10318}" [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ahcix86] "Type"=dword:00000001 "Start"=dword:00000000 "ErrorControl"=dword:00000001 "Tag"=dword:00000021 "ImagePath"="system32\\drivers\\ahcix86.sys" "Group"="SCSI Miniport" [HKEY_LOCAL_MACHINE\SYS
PAGE 14
9) Reboot the computer and enter F10 setup during the boot. Go to System Configuration/Device Configurations/SATA Device Mode and change it to AHCI, then save settings and exit F10 Setup 10) After windows boots back to desktop, open Device Manager, expand the SCSI and RAID controllers, and select the device that is listed. Right-Click it and go to Update Driver. a. At the first dialog, select ‘No, not this time’ when prompted to connect to Windows Update. b.
PAGE 15
3) When the “Run” dialogue box appears, type the following command: devmgmt.msc Press the OK button to launch the Device Manager console. Refer to the screenshot below for this step. 4) When the Device Manager Console opens, scroll down to locate & expand the category for IDE ATA/ATAPI controllers as seen in the screenshot below: 5) Double click on the listed SATA AHCI Controller to bring up the device’s property window.
PAGE 16
6) In the device property window, select the Details tab and choose “Hardware Ids” from the drop-down menu as seen in the screenshot below. The Device ID needed from the list is the one with the simple Class Code Hardware ID (identified with a “CC” string in the name). In the example below, the Device ID needed is PCI\VEN_8086&DEV_2929&CC_0106.
PAGE 17
Steps to obtain the SATA Device ID from a Windows Vista image 1) Begin by taking a Windows Vista system with the HP image already on it. Turn on the system and boot into the Operating System. 2) Once the Operating System is loaded, select the Start Button and type the following command: devmgmt.msc Pressing the Enter key after typing the above command will launch the Device Manager console. Refer to the screenshot below for this step.
PAGE 18
3) When the Device Manager Console opens, scroll down to locate & expand the category for IDE ATA/ATAPI controllers as seen in the screenshot below: 4) Double click on the listed SATA AHCI Controller to bring up the device’s property window.
PAGE 19
5) In the device property window, select the Details tab and choose “Hardware Ids” from the drop-down menu as seen in the screenshot below. The Device ID needed from the list is the one with the simple Class Code Hardware ID (identified with a “CC” string in the name). In the example below, the Device ID needed is PCI\VEN_8086&DEV_2929&CC_0106.
PAGE 20
For more information To learn more about HP business notebooks, contact your local HP sales representative or visit our Web site at: www.hp.com/go/notebooks. Share with colleagues © Copyright 2010 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.