Maintenance and Service Guide

Item Component Description
NOTE: Be sure that the device cable has a 4-conductor
connector that supports both audio-out (headphone) and
audio-in (microphone).
(5) Volume button Controls speaker volume.
To decrease speaker volume, press the – edge of the button.
To increase speaker volume, press the + edge of the button.
Right side
Item Component Description
(1) Hard drive light
●
Blinking white: The hard drive is being accessed.
●
Amber: HP 3D DriveGuard has temporarily parked the
hard drive.
(2) Memory card reader Reads optional memory cards that store, manage, share, or
access information.
To insert a card: Hold the card label-side up, with connectors
facing the slot, insert the card into the slot, and then push in
on the card until it is firmly seated.
To remove a card:
Press in on the card it until it pops out.
(3) USB 3.0 ports (2) Each USB 3.0 port connects an optional USB device, such
as a keyboard, mouse, external drive, printer, scanner or
USB hub.
(4) HDMI port Connects an optional video or audio device, such as a
highdefinition television, any compatible digital or audio
component, or a high-speed HDMI device.
(5) RJ-45 (network) jack/status lights Connects a network cable.
●
White: The network is connected.
●
Amber: Activity is occurring on the network.
(6) AC adapter light
●
On: The AC adapter is connected and the battery
is charged.
●
Off: The computer is using battery power.
Right side 11