Maintenance and Service Guide

4. Release the display TouchScreen cable from the routing clip (4) built into the bottom cover.
5. Remove the three Phillips PM2.5×5.7 screws (1) and the Phillips PM2.5×3.3 screw (2) that
secure the display assembly to the bottom cover.
6. Remove the display assembly (3).
7. If it is necessary to replace the display panel or any of the display assembly internal
components:
a. Remove the display bezel screw covers (1).
The screw covers are included in the Rubber Kits, spare part numbers 768019-001 (for use
only on computer models in natural silver finish) and 768018-001 (for use only on computer
models in vibrant red finish).
Display assembly 43