HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide

Number Component Product number
6
HP LaserJet Booklet Finisher
2
Y1G07A
The following punch kits are available:
●
Y1G10A – HP LaserJet Hole Punch 2/3
Accessory
●
Y1G11A – HP LaserJet Hole Punch 2/4
Accessory
●
Y1G12A – HP LaserJet Hole Punch Swedish
Accessory
●
Y1G13A – HP LaserJet Inner Finisher and
Booklet Finisher rell staple cartridge
●
Y1G14A – HP LaserJet Stapler/Stacker rell
staple cartridge
7
HP LaserJet Inner Finisher
1
Y1G00A
The following punch kits are available:
●
Y1G02A –HP LaserJet Inner Finisher Hole 2/3
Punch
●
Y1G03A - HP LaserJet Inner Finisher Hole 2/4
Punch
●
Y1G04A – HP LaserJet Inner Finisher Swedish
Punch
●
Y1G13A – HP LaserJet Inner Finisher and
Booklet Finisher rell staple cartridge
8 HP LaserJet Job Separator (Workgroup) Y1G15A
9 HP LaserJet Second Exit Y1G23A
NOTE: Not shown in conguration.
10 HP LaserJet Spacer Y1G24A
NOTE: Not shown in conguration. Required if
adding console nishers.
11 HP LaserJet Paper Tray Heaters (Workgroup) Y1G22A
NOTE: Not shown in conguration.
The following accessories are also available:
●
Y1G22A#BGJ - HP LaserJet Paper Tray Heaters
Accessory (Workgroup) (110V)
●
Y1G22A#B19 – HP LaserJet Paper Tray Heaters
Accessory (Workgroup) (220V)
1
The HP Second Exit is required the HP LaserJet Inner Finisher, HP LaserJet Booklet Finisher, and HP LaserJet Stapler/Stacker Finisher.
2
The Inline paper transfer unit (IPTU) (bridge) ship with the HP LaserJet Stapler/Stacker and HP Booklet Finisher.
ENWW Conguration options 9