HP LaserJet Managed MFP E72525, E72530, E72535, E77822, E77825, E77830 - On-Site Installation Guide
4. Pinch the blue tabs, and then rotate the top of the staple cartridge carriage assembly away from the staple
cartridge.
IMPORTANT: Do not discard the empty staple cartridge carriage. It must be reused with the new staple
cartridge assembly.
NOTE: In order to replace staple cartridge, to remove the staple cartridge from the inner nisher the
staple cartridge must be empty.
5. Lift two tabs on the staple cartridge, and then lift up to remove the empty staple cartridge from the staple
cartridge carriage assembly.
6. Insert the new staple cartridge in to the staple cartridge carriage assembly.
7. Rotate the top of the staple cartridge carriage assembly until it clicks into place.
8. Reinstall the staple cartridge carriage assembly into the booklet maker.
9. Slide the booklet maker assembly into the nisher assembly.
10. Close the booklet maker door.
Replace the staple cartridge in the stapler stacker area
Click here to view a video for the following procedure.
HP LaserJet Inner Finisher and Booklet Finisher rell staple cartridge: Y1G13A.
1. Open the booklet maker door.
ENWW Finishers 93