HP Color LaserJet Managed MFP E77800 Series, HP LaserJet Managed MFP E72500 Series - User Guide

Set up fax
Set up the fax features for the printer.
●
Introduction
●
Set up fax by using the printer control panel
Introduction
This information applies to fax models, or to other printers when an optional analog fax accessory has been
installed. Before continuing, connect the printer to a phone line (for analog fax) or to an Internet or network fax
service.
Set up fax by using the printer control panel
Congure the fax features using the control panel.
1. From the Home screen on the printer control panel, navigate to the Settings application, and then select
the Settings icon.
2. Open the following menus:
● Fax
● Internal Fax Modem Setup
NOTE: If the Internal Fax Modem Setup menu does not appear in the menu listing, LAN or Internet
fax might be enabled. When LAN or Internet fax is enabled, the analog fax accessory is disabled and
the Internal Fax Modem Setup menu does not display. Only one fax feature, either LAN fax, analog
fax, or Internet fax, can be enabled at a time. To use analog fax when LAN fax is enabled, use the HP
Embedded Web Server to disable LAN fax.
3. Select the location from the list on the right side of the screen, and then select Next.
4. Touch the Company Name text eld, and use the keypad to type the company name.
5. Touch the Fax Number text eld, and use the keypad to type the sending fax number. Select Next.
6. Verify that the date and time settings are correct. Make changes as necessary, and then select Next.
7. If a dialing prex is required for sending faxes, touch the Dialing Prex text eld, and use the keypad to
enter the number.
8. Review all the information on the left pane, and then select Finish to complete the fax setup.
136 Chapter 7 Fax ENWW