HP Color LaserJet Managed MFP E77800 Series, HP LaserJet Managed MFP E72500 Series - User Guide
Table 1-6 Dimensions of the E72525dn, E72525z, E72530dn, E72530z, E72535dn, E72535z models
Printer fully closed Printer fully opened
1. Height dn models:827 mm
z models:925 mm
dn models:1191 mm
z models:1325 mm
2. Depth dn models:730 mm
z models:780 mm
dn models:1115 mm
z models:1216 mm
3. Width dn models:568 mm
z models:584 mm
dn models:1010 mm
z models:1026 mm
Weight dn models:68.1 kg
z models:77.8 kg
▲ These values are subject to change. For current information, go to http://www.hp.com/support/
ljE72500MFP or http://www.hp.com/support/colorljE77800MFP.
Power consumption, electrical specications, and acoustic emissions
In order to operate properly, the printer must be in an environment that meets certain power specications.
See http://www.hp.com/support/ljE72500MFP or http://www.hp.com/support/colorljE77800MFP for current
information.
CAUTION: Power requirements are based on the country/region where the printer is sold. Do not convert
operating voltages. This will damage the printer and void the printer warranty.
Operating-environment range
In order to operate properly, the printer must be in an environment that meets certain specications.
Table
1-7 Operating-environment specications
Environment Recommended Allowed
Temperature 17° to 25°C 10° to 32.5°C
Relative humidity 30% to 70% relative humidity (RH) 10% to 80% RH
Printer hardware setup and software installation
For basic setup instructions, see the Hardware Installation Guide that came with the printer. For additional
instructions, go to HP support on the web.
Go to http://www.hp.com/support/ljE72500MFP or http://www.hp.com/support/colorljE77800MFP for HP's all-
inclusive help for the printer. Find the following support:
● Install and congure
● Learn and use
● Solve problems
ENWW Printer hardware setup and software installation 21