HP Color LaserJet Managed MFP E77800 Series, HP LaserJet Managed MFP E72500 Series - User Guide

Load paper to Trays 2 and 3

The following information describes how to load paper into Trays 2 and 3.

●

Load Trays 2 and 3

●

Trays 2 and 3 paper orientation

●

Use alternative letterhead mode

CAUTION: Do not extend more than one paper tray at a time.

Load Trays 2 and 3

These trays hold up to 520 sheets of 75 g/m

paper.

NOTE: The procedure to load paper to Tray 2 and Tray 3 is the same. Only Tray 2 is shown here.

1. Open the tray.

NOTE: Do not open this tray while it is in use.

2. Before loading paper, adjust the paper-width

guides by holding down the blue lock/unlock toggle

switch on the rear paper-width guide, pinching the

blue adjustment latch on the front paper-width

guide, and then sliding the guides to the fully open

position.

3. Adjust the paper-length guide by pushing in at the

bottom of the blue adjustment latch while sliding

the guide to the size of the paper being used.

30 Chapter 2 Paper trays ENWW