HP Color LaserJet Managed MFP E77800 Series, HP LaserJet Managed MFP E72500 Series - Warranty and Legal Guide

Protecting the environment
HP is committed to providing quality products in an environmentally sound manner. This product has been
designed with several attributes to minimize impacts on our environment.
Ozone production
The airborne emissions of ozone for this product has been measured according to a standardized protocol* and
when these emissions data are applied to an anticipated high-use scenario in an oice workspace**, HP has
determined there is no appreciable amount of ozone generated during printing and the levels are well within
current indoor air quality standards and guidelines.
* Test method for the determination of emissions from hardcopy devices with respect to awarding the
environmental label for oice devices with printing function; DE-UZ 205 – BAM January, 2018
** Based on ozone concentration when printing 2 hours per day in 30.6 cubic meter room with a ventilation rate
of 0.68 air changes per hour with HP printing supplies
Power consumption
Power usage drops signicantly while in Ready, Sleep, or O mode, which saves natural resources and saves
money without aecting the high performance of this product. HP printing and imaging equipment marked with
the ENERGY STAR
®
logo is qualied to the U.S. Environmental Protection Agency's ENERGY STAR specications for
imaging equipment. The following mark will appear on ENERGY STAR qualied imaging products:
Additional ENERGY STAR qualied imaging product model information is listed at:
www.hp.com/go/energystar
Toner consumption
EconoMode uses less toner, which might extend the life of the print cartridge. HP does not recommend the full-
time use of EconoMode. If EconoMode is used full-time, the toner supply might outlast the mechanical parts in
the print cartridge. If print quality begins to degrade and is no longer acceptable, consider replacing the print
cartridge.
Paper use
This product’s duplex feature (manual or automatic) and N-up printing (multiple pages printed on one page)
capability can reduce paper usage and the resulting demands on natural resources.
Plastics
Plastic parts over 25 grams are marked according to international standards that enhance the ability to identify
plastics for recycling purposes at the end of the product’s life.
22 Chapter 2 Environmental product stewardship program ENWW