HP Enterprise printers and scanners - Imaging and Printing Security Best Practices (white paper)

Figure 4: Shows the Storage Media pop-up details.
Figure 4 is an example of a disk that has not the Secure Hard Disk Accessory installed. The Highlighted line is the hard disk. The
other listed disk is the original memory module which is no longer being used for customer data. As such it is listed as No Encrypted
Disk. If the product does not have an accessory, the memory will show as shown in Figure 5.
Figure 5: Shows the memory of a printer without a hard drive showing status of Not Encryptable
Follow these steps to use the EWS to verify your HP Secure Hard Disk is installed and configured:
1. Go to the EWS for each print device and select the Security tab. (Figure 6).
Figure 6: Shows the content of the Security tab of your devices EWS.