HP Enterprise printers and scanners - Imaging and Printing Security Best Practices (white paper)

Now, whenever you click Apply to configure settings, the MFP or other device will check for the SNMPv3 credentials.
Note:
For convenience, Web Jetadmin stores the credentials for each device in an encrypted format. However, Web Jetadmin may still
prompt you for credentials on occasion so remember the passwords you set.
Click Done to exit the Configure Devices dialogue and continue with this checklist.
Configuring Device Settings
The Device category includes settings that affect some of the normal use of the print device. The following settings affect how jobs
are stored, and how long your print device will wait before a job times out in a particular way.
Click the Device category on the Config tab, to view the following configuration options:
I/O Timeout to End Print Job
The I/O Timeout to End Print Job allows you to specify the amount of time a device should wait between packets before canceling a
job. Setting this timeout will help prevent jobs formed or sent incorrectly from tying up a print resource. To set this timeout follow
the instructions below.
From the Device category select the I/O Timeout to End Print Job menu (Figure 13).
Click checkbox to enable the I/O Timeout to End Print Job setting and select a reasonable time the print device should wait
between data packets.
Figure 13: The I/O Timeout to End Print Job options.
Input Auto Continue Timeout
The Input Auto Continue Timeout allows you to specify the amount of time a device should wait before performing the default
action when the specified media size for a job is not available. Setting this timeout will help prevent jobs sent with improper paper
or media selections from tying up a print resource. To set this timeout follow the instructions below.
From the Device category, select the Input Auto Continue Timeout menu.
Click checkbox to enable the Input Auto Continue Timeout setting and select a reasonable time the print device should wait
between data packets.