HP Enterprise printers and scanners - Imaging and Printing Security Best Practices (white paper)

Figure 29: The Bootloader Password option.
Type a password of 9 to 16 numeric digits in the New Password field and repeat it exactly in the Repeat Password field.
Note:
To reset (clear) this password, click to select Bootloader Password, type the correct current password, and leave the New Password
and Repeat Password fields blank. Then click Configure, and the bootloader password will be cleared in the MFPs.
Digital Sending Service
The Digital Sending Service is used when your print infrastructure utilizes a DSS server or other HP print solutions. If you have a
print infrastructure, keep Allow use of digital send service checked. Otherwise, deselect this checkbox to prevent from
unauthorized use of this service.
On the Config tab under the Security category page, select the Digital Sending Service option (
Figure 30).
Figure 30: The Digital Sending Service option.
Embedded Web Server Password
You can configure many of the settings in this checklist using the Embedded Web Server. To protect your MFP while configuring
this checklist using Web Jetadmin it is important to set the Embedded Web Password. To do this, follow these instructions.
Click Embedded Web Server Password under the Security category (Figure 31).
28