HP Enterprise printers and scanners - Imaging and Printing Security Best Practices (white paper)

Viewing of job log and print page information on the EWS information tab is enabled on default. To restrict access to this data,
disable the feature.
To disable Print Page and Job Log:
1. Browse to the Embedded Web Server for the target device.
2. Select the Security tab.
3. Select General Settings from the left-hand menu.
4. Uncheck the boxes for Display Print Page on Information tab and Display Job Log in Information Tab (Figure 63).
5. Click Apply.
Figure 63 Disable Display Print Page and Job Log on EWS information tab
TFTP Configuration File
BOOTP is a protocol that provides a method for a network host to obtain an IP address and configuration information from a BOOTP
server. Jetdirect supports the BOOTP protocol. When enabled, Jetdirect sends a BOOTP message onto the network. A properly
configured BOOTP server responds to the message with an IP address that Jetdirect can use. In addition to providing an IP address,
the BOOTP server can also provide the location of a TFTP configuration file for automatic configuration of Jetdirect. When the TFTP
Configuration File setting is enabled, Jetdirect attempts to retrieve the TFTP configuration file from the server containing the file
through the TFTP protocol.
To enable the use of the TFTP Configuration File:
1. Browse to the Embedded Web Server for the target device.
2. Select the Networking tab.
3. Choosing Other Settings from the left-hand menu.
4. Checking the box for TFTP Configuration File (Figure 64).
48