HP Enterprise printers and scanners - Imaging and Printing Security Best Practices (white paper)

Settings List

This section is a complete list of the settings recommended in this checklist. This section does not include instructions or

explanations. It is intended to be used as a check-off list of the recommended settings to help ensure that you complete the

entire configuration. See the Network Security section (above) and the Ramifications section (below) for information on each

setting.

NOTE:

This section lists recommended settings for reasonable security on the most common networks that include MFPs. MFPs

configured according to this list are considered secure, but HP does not warrant or guarantee that this configuration prevents or

limits all malicious network attacks. Remember that these settings are recommended for the most common types of network

environment. Your environment may require configurations not recommended in this checklist. Consider each setting in the

context of your network environment needs and constraints.

Recommended Basic Settings

Initial Settings

 Verify your HP Secure Hard Disk is functioning correctly.

 Configure SNMPv3 (Security page).

Device Category Settings

 Configure I/O Timeout to End Print Job

 Configure Input Auto Continue Timeout

 Configure Job Hold Timeout.

 Enable Job Retention.

 Configure Job Storage Limit

Network Category Options

 Disable e-Print Settings

 Configure Error Handling

 Configure HTTP Idle Timeout.

 Configure Network Enable Features options.

 Enable EWS Config.

 Disable Telnet Config.

 Disable SLP Config.

 Disable FTP Printing.

 Disable LPD Printing.

 Enable 9100 Printing.

 Disable Air Print.

 Disable IPP Printing.

 Disable IPPS.

 Disable mDNS Config.

 Disable IPV4 Multicast Config.

 Disable WS-Discovery.

 Disable HP XML Services

 Configure TCP Idle Timeout.

 Disable Web Services Print.