HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)
2. In the left navigation pane, click Job Statistics Settings. Congure the job statistics settings as follows:
a. If the printer is connected to a job statistics service, and the service is available, this connection is
listed under Job Statistics Service.
b. To capture user data in a statistics log, select Enable Device User Statistics Log, and then click Apply.
Figure 6-3 Job Statistics Settings page
3. In the left navigation pane, click Quota Settings. Congure the quota settings as follows:
a. If the printer is connected to a remote quota service, and the service is available, this connection is
listed under Remote Quota Service.
b. To connect to a legacy quota service installed on a network server, select Connect this device to a
Legacy Quota Server, and complete the following:
● Enter the URL for the quota server in the Quota Server URL eld.
● Enter a Username and Password for accessing the quota server.
● Set a Connection Timeout value from 10–300 seconds, or accept the default setting of 60
seconds. The Connection Timeout is the time after which the connection to the Quota Server is
closed after the user completes the job.
● Set a Response Timeout value from 10–300 seconds, or accept the default setting of 60
seconds. The Response Timeout is the time after which the printer stops attempting to connect
to the Quota Server if there is no response from the server.
ENWW Congure the printer 95