HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)

Step two: Congure the Send to E-mail feature
The two options for conguring Send to Email are the E-mail Setup Wizard for basic conguration and E-mail
Setup for advanced conguration. Use the following options to congure the Send to E-mail feature:
●
Method one: Basic conguration using the E-mail Setup Wizard
●
Method two: Advanced conguration using the E-mail Setup
Method one: Basic conguration using the E-mail Setup Wizard
This option opens the E-mail Setup Wizard in the HP Embedded Web Server (EWS) for basic conguration.
1. Using the EWS top navigation tabs, click Scan/Digital Send.
2. In the E-mail and Save to Network Folder Quick Setup Wizards area, click the E-mail Setup Wizard link.
3. On the E-mail Setup Wizard dialog, click Continue to proceed with the conguration.
4. On the Congure E-mail Servers (SMTP) dialog, select one of the following options and complete the steps:
Option one: Use a server already in use by E-mail
▲ Select Use a server already in use by E-mail, and then click Next.
Option two: Search network for outgoing e-mail server
This option nds outgoing SMTP servers inside your rewall only.
a. Select Search network for outgoing e-mail server, and then click Next.
b. Select the appropriate server from the Congure E-mail Server (SMTP) list, and then click Next.
c. Select the option that describes the server’s authentication requirements:
– Server does not require authentication: Select Server does not require authentication, and then
click Next.
-OR-
– Server requires authentication: From the drop-down list, select an authentication option:
○ Use credentials of user to connect after Sign In at the control panel: Select Use credentials
of user to connect after Sign In at the control panel, and then click Next.
140 Chapter 6 Congure printer features using the EWS ENWW