HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)

Table 6-15 Scan settings (continued)
Option Description
Default Output Quality Select the default output quality for the scanned document:
● Low (small le)
● Medium
● High (large le)
Default Resolution Select the default scan resolution for the scanned document:
● 75 dpi
● 150 dpi
● 200 dpi
● 300 dpi
● 400 dpi
● 600 dpi
7. Review the Summary area, and then click Finish to complete the setup.
Method two: Advanced conguration using the E-mail Setup
Use the following steps for advanced conguration using the E-mail Setup dialog.
1. Using the EWS top navigation tabs, click Scan/Digital Send, and then click E-mail Setup in the left navigation
pane.
2. On the E-mail Setup dialog, select the Enable Send to E-mail check box. If this check box is not selected,
the feature is unavailable at the printer control panel.
3. In the Outgoing E-mail Servers (SMTP) area, complete the steps for one of the following options:
● Select an existing server from the Outgoing E-mail Servers (SMTP) table.
-OR-
Click Add to start the SMTP wizard.
1. In the SMTP wizard, select one of the following options:
○ Option one:I know my SMTP server address or host name: Enter the address of an SMTP
server, and then click Next
○ Option two: If you do not know the address of the SMTP server, select Search network for
outgoing e-mail server, and then click Next. Select the server, and then click Next.
ENWW Congure scanning and digital sending 143