HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)
Set up fax send
Use the following information to set up fax send using the EWS.
●
Introduction
●
Before you begin
●
Step one: Select the fax send method
●
Step two: Set up the Common Job Settings
●
Step three: Congure a fax send method
●
Step four: Complete the setup
Introduction
Set up faxing from the internal modem, or set up the LAN fax service or an Internet fax service. Also, congure
fax-send settings that are common for all fax jobs that are sent from the printer.
View a video demonstration of how to set up the Fax Send feature
Before you begin
Connect the fax cable to the fax port on the printer and to the phone port on the wall.
Administrators need the following information before beginning the conguration process for Internet Fax Setup:
● Administrative access to the printer
● DNS sux (e.g., companyname.com)
● SMTP server (e.g., smtp.mycompany.com)
NOTE: If you do not know the SMTP server name, SMTP port number, or authentication information,
contact the e-mail/Internet service provider or system administrator for the information. SMTP server
names and port names are typically found by doing an Internet search. For example, use terms like "Gmail
SMTP server name" or "yahoo SMTP server name" to search.
● SMTP server authentication requirements for outgoing e-mail messages, including the user name and
password used for authentication, if applicable.
ENWW Congure faxing 235