HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)
Option two: Congure LAN Fax Setup
When signing up for LAN fax service, the service provider should have given the information needed to set up the
service. Use that information to congure the service, and then follow these instructions to use the service with
the printer. Depending on the service provider, some of these settings might not be available.
1. In the Fax Send Setup area, click the LAN Fax Setup tab.
2. In the LAN Fax Service Settings area, select the name of the LAN fax service. Select the le format that the
service uses.
3. In the Folder Settings area, select one of the following options:
Option one: Save to a standard shared network folder
a. Select Save to a standard shared network folder.
b. Enter the network folder information in the elds, and then click the Verify Folder Access button. The
UNC path uses this format: \\servername\sharename\foldername.
Option two: Save to an FTP Server
a. Select Save to an FTP Server.
b. Enter the FTP server information in the elds, and then click Verify Folder Access.
4. In the Dialing Settings area, enter the maximum number of times the printer should attempt to try sending
the fax if the rst attempt is unsuccessful. Also enter the number of minutes to wait between attempts.
5. In the Input Settings area, select whether to receive notication if there are errors sending the le to the
network folder. If Error Correction Mode is enabled, unsuccessfully sent portions of a fax are sent again.
6. In the Output Settings area, select the appropriate transmission speed, and select whether to include a
cover page that the LAN fax service provides.
7. In the Billing Code Settings area, choose whether to enable billing codes. Select Enable Billing Codes to
enable this feature, and then enter a Default Billing Code and a Minimum Length for the code. There is an
option to Allow users to edit billing code.
Option three: Congure Internet Fax Setup
When signing up for the Internet fax service, the service provider should have given you the information needed
to set up the service. Use that information to congure the service, and then follow these instructions to use the
service with the printer.
1. In the Fax Send Setup area, click the Internet Fax Setup tab.
2. In the Internet Fax Service Settings area, enter the information from your service provider in the Internet
Fax Provider Domain and the T37 Prex elds.
3. Enter the Default Fax Account E-mail Address. If you want to use the email address for the user who is
signed in to the printer, select the appropriate box.
4. Select a File Format.
ENWW Congure faxing 239