HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)

1. From the Home screen on the printer control panel, scroll to and select Reports.
2. Select Conguration/Status Pages.
3. Select Conguration Page.
4. Select Print to print the conguration page.
5. On the Conguration Page, look in the Device Information section for the Firmware Revision and Firmware
Datecode similar to the following example:
● Firmware Revision: 2131029_189663 (version installed)
● Firmware Datecode: 20110811 (version date)
Method two: Embedded Web Server (EWS)
Follow the steps below to print a conguration page from the Embedded Web Server (EWS).
1. From the EWS home page, select the Information tab.
2. Select Printable Reports and Pages from the left navigation pane.
NOTE: If the Printable Reports and Pages menu is locked, login using administrator credentials.
3. Select Conguration page and select Print.
4. On the Conguration Page in the Device Information section, locate the Firmware Revision and Firmware
Datecode similar to the following example:
● Firmware Revision: 2131029_189663 (version installed)
● Firmware Datecode: 20110811 (version date)
Set up and use HP Web Services
The HP Web Services tab provides access to the HP Web Services setup parameters and Web proxy settings on
the HP Jetdirect print server. For more information, click the Help link located in the upper-right corner of the
page.
ENWW Set up and use HP Web Services 303