HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)

– DNS Failure Threshold - Failure threshold value to enable throttle mode for detecting false alarms.
– Monitoring Window - Time duration to monitor failed DNS queries for enabling throttle mode.
– Protected Mode Duration - (Throttle mode duration) The duration where the printer operates in a safe
mode after and initial detection.
● Remediation settings
– Number of Times in a Protected Mode - Maximum number of times the printer can enter into Throttle
mode before remediation action.
– Cumulative Protected Mode Duration - Maximum duration the printer can be in Throttle mode before
remediation action.
● Advanced settings
– White List / Exception List - White list table entries are considered as safe DNS queries during
throttling mode.
● Restore settings
– To restore HP Connection Inspector to default values, click the Restore Defaults button.
NOTE: If you enter a value, click Apply to set it, or click Cancel to ignore the entry.
USE CAUTION when changing IP addresses; the connection to the Embedded Web Server will be closed, and
client printing may be aected. To re-establish a connection, use the new IP address.
TCP/IP cannot be disabled. It is required for communication with the Embedded Web Server.
TCP/IPv4. Allows you to congure IP version 4 (IPv4) parameters, including server-based or manual IPv4 address
settings. For Auto IP, a link-local address is assigned automatically by the print server.
TCP/IPv6. Allows you to congure IP version 6 (IPv6) parameters, including server-based or manual IPv6 address
settings. Multiple IPv6 addresses may be congured. A stateful address may be assigned, for example, from a
DHCPv6 server. A stateless address, such as a link-local address, is assigned automatically by the print server.
Cong Precedence. Provides access to a conguration precedence table, to indicate which conguration method
has precedence over another.
Advanced. Provides access to other TCP/IP network settings, including idle timeout, LPD banner page, FQDN
Update Options, Web Proxy Server and Syslog Server settings. You can also enable HP Customer Care Center
logging.
Web Proxy Setup - Use this page when you must manually congure a proxy server for use with HP Web
Services. This might be necessary if you have issues when enabling HP Web Services.
Proxy Server. Proxy server to use by embedded applications in your printer/MFP. Enter up to 64 alphanumeric
characters. A proxy server is typically used by network clients for Internet access. It caches Web pages and
provides a degree of Internet security for those clients. Enter its IP address or FQDN. On some networks, you
might need to contact your ISP for the proxy server address.
Proxy Server Port. Port number used by the proxy server for client support. Enter a value from 0 to 65535. The
port number identies the port reserved for proxy activity on your network.
Proxy Server User Name. If a user account is set on the proxy server, enter the user name.
Proxy Server Password. If a user account is set on the proxy server, enter the user password.
ENWW Networking Tab 31