HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)

Proxy Server Exception List. Web addresses, host names, or domain names not requiring access through the
proxy server. Use a semicolon (;) to separate addresses.
Network Settings
Use the tabs on this page to congure other network protocols. Depending on the print server model, you can
view or congure SNMP settings.
If you enter a value, click Apply to set it, or click Cancel to ignore the entry.
SNMP: Congure SNMP (Simple Network Management Protocol) operation. You may enable or disable the SNMP
v1/v2c or SNMP v3 agents on the print server. For SNMP v1/v2c, you can choose to control access through
custom SNMP community names and selectable options for the Get Community Name "public". For SNMP v3, you
may set up an account that allows a management application to access the SNMP v3 agent.
Other Settings
Use the tabs on this page to congure general printing protocols and services supported by the print server.
Depending on the print server model, you can congure the following items:
Misc. Settings. Enable or disable printing protocols and services. In addition, you can set 10/100/1000Base-T
Link settings, assign a locally administered address, congure networking features for supported multifunction/
scanning devices, determine name resolution, specify Bonjour priority service, and whether to clear device
settings (Erase Data) during a cold reset.
Firmware Upgrade. Upgrade your HP Jetdirect print server rmware. (For print servers that support rmware
upgrades.)
LPD Queues. Set up custom LPD (Line Printer Daemon) queues for printing.
USB Settings. (For HP Jetdirect external print servers with a USB printer port.) Congure Universal Serial Bus port
parameters for communications between the print server and connected device. The congurable parameters
available depend on the HP Jetdirect model and rmware version.
Support Info. Specify the Support page links. Designate a Support contact or phone number, or specify URL
addresses for product and technical support.
Refresh Rate. Species the time interval (in seconds) for embedded Web page updates. To disable the refresh
rate, set this value to 0 (zero).
AirPrint
AirPrint™ enables easy network printing from Apple supported products with no need to install drivers or
download software. AirPrint works on wireless and wired networks and over USB. AirPrint MUST be either
enabled by default or the Printer MUST have a single top-level menu item that enables all network interfaces,
networking services, and printing protocols required by AirPrint. The user can modify the AirPrint settings
parameter using Edit settings page.
● Device Name: A unique name given to the printer by the User. The default name is the Bonjour Service
name of the printer.
● Device Location: Describes the location of the printer.
● Use Degrees Minutes Seconds: Describes the exact location of the printer by mentioning latitude and
longitude coordinate values in Degrees, Minutes, and Seconds (DMS).
● Use Decimal degrees: Describes the exact location of the printer by mentioning latitude and longitude
coordinate values in Decimal Degrees, (DD).
32 Chapter 4 Congure the network to which a printer is attached ENWW