HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)
NOTE: The Enable reverse DNS lookups option is selected by default. Use a secure connection (SSL) is
disabled by default.
Match and retrieve attribute elds
● Match the name entered with this attribute: The sAMAccountName attribute is entered by default.
This attribute retrieves the Windows Active Directory account name to verify the user names.
● Retrieve the user's e-mail address using this attribute: The mail attribute is entered by default and is
the recommended attribute. This attribute retrieves the Windows Active Directory user's email
address to pre-populate address elds as appropriate.
● Retrieve the device user's name using this attribute: The displayName attribute is entered by default.
This attribute retrieves the Windows Active Directory display name.
8. To verify that the sign-in method is working correctly, enter a valid Username and Password in the Test
Windows Sign in area, and then click Test.
9. At the bottom of the page, click OK to save the settings.
NOTE: To remove a domain, select the domain, and then click Remove.
LDAP sign-in setup
Use the following steps to set up LDAP sign-in.
1. Using the EWS top navigation tabs, click Security.
2. In the left navigation pane, click Access Control.
3. To enable the LDAP sign-in method, click the Setup link for this method on the Access Control page.
4. Select the Enable LDAP Sign In check box in the Setup area.
5. Enter an LDAP address in the LDAP Server Address eld. The address can be a fully-qualied host name or
an IP address in dotted-decimal notation.
6. Select Use a secure connection (SSL) to use SSL when connecting, and then enter the port number on the
LDAP server in the Port eld.
NOTE: When using TSL or SSL, port 636 is used by default.
7. Specify the authentication requirements in the Server Authentication Requirements area.
a. Select Use Device User's Credentials, and then enter the Bind Prex.
b. Select Use LDAP Administrator's Credentials, and then enter values in the LDAP Administrator's DN
and Password elds.
8. In the LDAP Database Search Settings area, enter the Bind and Search Root, and then click Add.
9. Verify the match and retrieval default attributes and update if necessary.
Match and retrieve attribute elds:
● Match the name entered with this attribute: Enter the name of an attribute
● Retrieve the user e-mail address using this attribute: Enter the name of an attribute
ENWW Congure Access Control settings for walk-up features in the EWS 53