HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)
Step one: Set up Protect Stored Data
Learn how to set up Protect Stored Data using the EWS.
●
Drive Status
●
Job Data
●
Change Password for Encrypted Drives
●
Managing Temporary Job Files
●
Manage Stored Jobs
Drive Status
Click the Security tab, and then select Protect Stored Data to access the Drive Status in the EWS.
The Drive Status area of the Protect Stored Data page contains the following information about each drive
installed on the printer:
● Type of drive
● Content on the drive
● Serial number
● Encryption status
If multiple drives are installed on the printer, use this Drive Status area to specify which drive the printer uses by
using the Use Drive... operation and also to perform an Erase Drive... operation on a specied drive.
eMMC/SSD devices show Status Disk Cannot be encrypted for the encryption status. This status is normal
because these devices are not self-encrypting. All customer data written to eMMC/SSD devices is encrypted.
Job Data
Use the following steps to select a data erase mode.
Figure 5-4 Job Data for printers with a hard disk drive
58 Chapter 5 Congure printer security ENWW