HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)

Congure the certicate validation settings
Use the following information to congure the certicate validation settings in the EWS.
●
Congure OCSP certicate validation
●
Congure CDP certicate validation
Congure OCSP certicate validation
Use the following steps to set up OCSP certicate validation.
NOTE: Certicates might need to be installed in the Certicates tab for the OCSP servers.
1. Using the top navigation tabs, click Security.
2. In the left navigation pane, click Certicate Management.
3. Click the Certicate Validation tab of the Certicate Management page.
4. Select the Perform OCSP Validation on the certicate trust chain option on the Certicate Validation tab.
5. Enter a URL for an OCSP server, and then click Add.
NOTE: Multiple OCSP servers can be added for certicate validation. The URLs for the OCSP server(s)
might be fully-qualied domain names or IP addresses.
6. Select the Treat Unknown certicate status as valid check box, if necessary.
7. Click Apply to save the settings.
Congure CDP certicate validation
Use the following steps to congure CDP certicate validation.
1. Using the top navigation tabs, click Security.
2. In the left navigation pane, click Certicate Management.
3. Click the Certicate Validation tab of the Certicate Management page.
4. Select the Perform CDP Validation on the certicate trust chain option on the Certicate Validation.
5. Click Apply to save the settings.
68 Chapter 5 Congure printer security ENWW