HP LaserJet Enterprise, HP LaserJet Managed, HP PageWide Enterprise, HP PageWide Managed - Configuration Guide using the Embedded Web Server (EWS)

Congure the color calibration and cleaning cycles
Learn how to congure the color calibration and cleaning cycles using the EWS. These features are available in
the Troubleshooting tab.
●
Introduction
●
Print a cleaning page or perform a color calibration
●
Additional calibration and cleaning information
Introduction
Multifunction printers automatically calibrate and clean at various times to maintain the highest level of print
quality. The purpose of this document is to provide an understanding of these processes and suggest possible
conguration changes that will minimize interruptions to the user.
While the printer is calibrating and cleaning, the printer will pause normal print operations for the amount of
time it takes to complete the calibration or cleaning. For most calibrations and cleaning, the printer will not
interrupt a print job, but will wait for the job to complete (or in the case of a job with multiple copies, a copy
boundary) before calibrating or cleaning. In the case of very large jobs, a calibration may occur before the job
completes.
The end result of any calibration is to achieve an optimal printing state. This desired state is the result of
carefully measuring print performance over the life of several printers in dierent environmental conditions.
Print a cleaning page or perform a color calibration
Learn how to print a cleaning page or perform a color calibration using the EWS.
1. Click the Troubleshooting tab.
2. Open the Calibration/Cleaning menu.
3. Use one or both of the following options:
● Click Print to print a cleaning page.
● Click Start Color Calibration to perform color calibration.
ENWW Congure the printer 73